773629

Bebe Confort Natural Comfort Manual

22
Zoom out
Zoom in
Previous page
1/66
Next page
22
10- Troubleshooting
The motor does not function Check that:
• The USB cable and power cable are plugged in correctly. The buttons should illuminate briefly while plugging in the
power source. If it doesnt happen, try another power source.
• If the breast pump is on, push the button (1) Appendix I.
• If you are using battery power check that the batteries have been fitted correctly or have not run down (a red light
shows continuously for 20 seconds).
There is no suction or the suction is too
weak. • Ensure that the sheild (I + J) is sealed on the breast perfectly and all parts of the breast pump have been assembled
correctly. The transparent diaphragm (E) is in position between the cover (B) and the bottle ring (C+D). See Annexe III.
• Check that the tube (H) is connected to the shield (I+J), the bottle ring (C) and the white o-ring (D) has been placed
on the bottle ring (B).
• The lid (B) and the bottle ring (C) should be firmly assembled and check that there is no sign of wear or damage.
• Re-start the appliance then press the lid (B). You are in the sittinf position.
The device loses power while running on
batteries. Check that:
• Whether the red light is flashing as you express your milk. This indicates that you will need to replace the batteries or
recharge them before using the device again. Always keep new or recharged batteries near you.
Breast pain when expressing milk. • Use a lower level of suction. If the pain persists, speak to a breastfeeding adviser.
• Try different positions for shield (I + J).
• You can use a Bébé Confort plastic nipple to decrease the pressure on the nipple.
Little or no milk is produced. • Position the breast pump lower than your breast.
• Depending on the breast, the nipple could block the milk evacuation in the shield: if it happens, pause for several
minutes before recommencing.
• Follow the instructions for use, speak to a breastfeeding advisor if the problem persists.
Take care not to squash or kink the tube.
NB: A replacement parts kit (T) is supplied with the breast pump. The kit includes: a one-way valve (F) and two O-rings (D). We recommend
you replace the flexible internal shield, the tube and the nozzle as soon as you see any signs of wear (cracking, tears, etc.). Replacements are
available from your retailer. You should replace the tube after 6 weeks of use.
If you are unable to resolve a problem with the breast pump using the advice above, please phone the customer service department or email
us by going to the www.bebeconfort.com website, and clicking "Our Services" followed by "Contact us".
Bébé Confort has produced a breastfeeding guide packed with information and tips. It can be downloaded from www.bebeconfort.com.
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bebe Confort Natural Comfort at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bebe Confort Natural Comfort in the language / languages: English, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 3.83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info