768735
9
Zoom out
Zoom in
Previous page
1/27
Next page
16 17
ENEN
2wayFix maintenance instructions
1. Keep the 2wayFix clean. Do not use any lubricants or
aggressive cleaning agents on this product.
2. Press the test button to make sure that the batteries
have enough voltage (green LED indicator).
3. If the electronic component contains the right battery
type but is no longer functioning properly, contact your
retailer. The indicators only show whether the product
has been installed correctly. If the battery circuit is
interrupted after correct installation, the product is still
safe.
4. Replace old batteries with new, high-quality ones. Pay
attention to the plus and minus poles when installing
the batteries.
Batteries
- Keep all batteries out of reach of children.
- Only use the recommended type AA / LR6
(1.5 volt) batteries. Do not use rechargeable batteries.
- Never expose this product or the batteries to fire.
- Do not use old batteries or batteries that show signs of
leakage or cracks.
- Use only high-quality new batteries.
Environment
Keep all plastic packaging materials out of reach of your
child to reduce the risk of suffocation.
If you are no longer using this product, we ask that, for the
sake of the environment, you dispose of the 2wayFix in
accordance with local waste disposal regulations.
A 2wayFix base
B Anchor points for securing seat
C Storage compartment for manual
D ISOFIX connectors
E ISOFIX connectors release button
F Battery compartment
G Release button for support leg
H Support leg
I Seat release button
J Indicator panel
K ISOFIX connectors indicator
L Support leg indicator
M Indicator car seat locked in position
N Battery voltage indicator
O Installation test button
P Older then 15 Months indicator
Q Warning switch off front passenger airbag
Safety
2wayFix general instructions
1. The 2wayFix is for car use only.
2. The 2wayFix may only be used together with the Pebble
Plus and the 2wayPearl.
3. You are personally responsible for the safety of your
child at all times.
4. Never leave your child unattended.
5. Do not use second-hand products if you do not know
their history.
6. Replace the 2wayFix after an accident.
7. Please read this instruction manual carefully and keep
it for future reference.
8. Use only original parts approved by the manufacturer.
WARNING: Do not make any changes to the 2wayFix,
as this could result in dangerous situations.
2wayFix car use
1. The 2wayFix is an ISOFIX system.
2. It is only suitable for use in cars equipped with ISOFIX
anchor points. For more information, check your car
owner’s manual.
3. Check to make sure your car is listed on the approved
‘car fitting list’ on www.bebeconfort.com.
4. Before buying the 2wayFix, check to make sure it fits
properly in your car.
5. Check whether the fold-down rear seats are locked
into position.
6. Unfold the 2wayFix support leg completely and place it
in the most forward position (green LED indicator).
7. Press the test button to check a proper installation of
the product. When one of the LED indicators is red,
repeat the installation steps until all LED indicators are
green.
8. Make sure all luggage and other objects are secured.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bebe Confort 2wayFix at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bebe Confort 2wayFix in the language / languages: English, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 1,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info