665843
7
Zoom out
Zoom in
Previous page
1/14
Next page
12 13
The mid-drive comodo / Models Monte Maschio & Monte Donne
FUNCTION OVERVIEW
• Use of a two-way serial communication
protocol, simple operation of the display via the
external 5-key keypad.
• Speed display: displaying the real-time speed
as SPEED, the maximum speed as MAXS and the
average speed as AVG.
• km or mile: The user can choose between km
and mile.
• Intelligent battery level indication: With an
optimization algorithm, a stable display of the
battery level is ensured, and the problem of
fluctuant
battery level indication common with other
displays is avoided.
• Automatic light-sensitive lights: The headlight,
taillight and display light will be automatically
turned on/ o depending on lighting conditions.
• 5 levels o display backlighting: Dierent levels
• 5-Level-Support: setting power Levels 1 to 5
• Trip distance indication: The maximum distan-
ce displayed is 99999. Single-trip distances TRIP
or the total distance TOTAL can be displayed.
• Display of error messages
• Walk assistance
• Settings: Various parameters, e.g. mode, wheel
diameter, speed limit etc., can be set on the
computer
via a communication cable. See the setting
• Maintenance warning (this function can be
deactived):
Maintenance warning information is displayed
based on battery charge cycles and riding dis-
tance. The display automatically estimates the
battery life and gives warnings when the number
of charge cycles exceeds the set value. A warning
will also be displayed when the accumulated
total riding distance exceeds the set value.
INFORMATION ON THE DISPLAY
A) Maintenance warning: When there is a need
for maintenance the symbol SERVICE will be dis-
played (riding distance or the number of battery
charge cycles exceed the set value, function can
be deactivated)
B) Menu
C) Speed display: display of the speed, km/h
or mph
D) Speed mode: average speed (AVG km/h),
maximum speed (MAXS km/h)
E) Error display: When a fault is detected the
symbol will be displayed.
F) Distance indication: display of the distance
depending on the setting.
G) Level indication: The chosen level 1–5 will
be displayed; if there is no numeric display, it
means that there is no assistance (by the motor).
If the rider is walking and pushing the e-bike,
“WALK” will be displayed.
H) Walk assistance
I) Headlight indication: only shows when head-
light or backlight are on
J) Distance mode: display of the single-trip
distance TRIP and the total distance TOTAL
K)Battery level: 10-segment battery indication;
the voltage that each segment represents can
be customized
KEY DEFINITIONS
A) up (+)
B) down (-)
C) headlight
D) on/o
E) mode
NORMAL OPERATION
1 On/O Switch
Turn on the device. Press and hold for 2 seconds
to power on the display. Press and hold again
for 2 seconds to power o the display. If the bike
is not used, aer 5 minutes (time can be set) the
display will be automatically turned o.
2 Assist Mode Selection
In the manual gearshi mode, press the +
or – to choose the desired level of support by
the motor.
The lowest level is Level 1, the highest Level 5.
When the display is on, the default mode is Level
1. When there is no numeric mode display, there
is no power assistance.
3 Switch between Distance Mode and Speed
Mode
Briefly press i to switch between distance and
speed. Single-trip distance (TRIP km) / total
distance (TOTAL km) / maximum speed (MAXS
km/h) / average riding speed (AVG km/h) are
displayed in successive order.
4 Headlight/ Display Backlight Switch
Press for 2 seconds. The backlight of the
display as well as the headlight and taillight
will be turned on. Press again for 2 seconds
to power o the display backlight/headlight/
taillight. (If the display is turned on in a dark
environment, the display backlight/ headlight/
taillight will be turned on automatically. If the
display backlight/headlight/taillight are turned
o manually, they also need to be turned on
manually aerwards). There are 5 levels of back-
light brightness that can be selected by the user.
5 Walk Assistance
Press – for 2 seconds. The e-bike enters the
walk assistance mode, and the symbol WALK is
displayed. Once the key – is released, the e-bike
will exit the walk assistance mode.
6 Battery Status Indication
When the battery status is normal, a certain
number of the battery LCD segments as well
as the border light up according to the actual
quantity of charge. If all of the 10 segments will
black out with the border blinking, the battery
needs to be charged immediately.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beaufort Ricardo 2017 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beaufort Ricardo 2017 in the language / languages: English as an attachment in your email.

The manual is 0.76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Beaufort Ricardo 2017

Beaufort Ricardo 2017 User Manual - Dutch - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info