665842
6
Zoom out
Zoom in
Previous page
1/14
Next page
10 11
1 display will display symbol MAINTAIN when
the ODO accumulated more than setting
mileage (this parameter can be set by dealers),
the mileage symbol will flash for 4 seconds
when the display power on, the buzzer beep for
2 seconds at the same time.
2 Display will display symbol MAINTAIN When
the battery cycle over setting times, the symbol
of battery will flash for 4 seconds when the
display power on, the buzzer beep for 2 seconds
at the same time.
You can shutdown maintain reminding message
by parameter setting. Parameter setting / Main-
tain reminded / MA / 0
Error Code Description Action
0x 21 Current abnormal
0 x 22 Turn error Check turn to connect.
0 x 23 Motor phase lost
0 x 24 Hall error Check the hall connection
0 x 25 Brake error Check the brake connection.
0 x 30 Controller communication error
0 x 31 Battery communication error
11 Password/Speed limit set : The location
of speed display symbol PSd, remind to input
passwords, press UP/DOWN buttons to setup
password value (0~9), press LEFT/RIGHT buttons
to switch the password item, password is 4
digits, the default password is “1919”. Press
POWER button when password adjustment is
completed. Display will return to the Voltage
set item if the password is incorrect. Correct
password will enter the Speed limit set item.
12 Speed limit set : The location of speed
displays symbol SPL, the location of mileage
displays speed limit value, the default value is
25km/h. Press UP/DOWN buttons to modify the
value, the value can be set from 10 to 41km/h.
Press RIGHT button to enter the next item.
Note: The maximum speed is restrict by the
motor and controller, probably couldn’t reach
the setting value.
13 Magnetic Pole numbers of speed sensor:
The location of speed displays symbol HAL,
the location of mileage displays magnetic pole
number, the default value is 1, press UP/DOWN
buttons to modify the value, the value can be
set from 1 to 15.
14 Direction of speed sensor: The location of
speed displays symbol ASd, press UP/DOWN
button rotate display symbol 0/1, 0 indicates
forward, 1 indicates backward.
15 Over a few grains of magnet start: The
location of speed displays symbol SAd, the
location of mileage displays pole number, press
UP/DOWN buttons to modify the value.
16 Assist proportion: The location of speed
displays symbol SAr, the location of mileage dis-
plays assist proportion value, press UP/DOWN
buttons to modify the value.
17 Throttle set: The location of speed displays
symbol HAd, press UP/DOWN button display
symbol 0~1 to change the throttle OFF or ON.
18 Throttle 6KM set: The location of speed
displays symbol HAr, press UP/DOWN button
display symbol 0~1 to change the throttle 6km
OFF or ON.
19 Slow startup parameters: The location
of speed displays symbol Sdr, the location of
mileage displays value, press UP/DOWN button
to modify the value.
20 MAX Current set: The location of speed
displays symbol CUL, the location of mileage
displays current limit value, the default value is
15A. Press UP/DOWN button to modify the value.
21 Range of assist level setting: The location
of speed displays symbol PAS, the location of
mileage displays assist range, the default is UBE.
Press UP/DOWN button to change the value
from0-3 to UBE.
22 Battery Pack Temperature: The location
of speed displays symbol ETE, the location of
mileage displays the temperature of the battery
pack. Unit: °C.
23 Battery Pack Voltage: The location of
speed displays symbol bSU, the location of
mileage displays the voltage of the battery pack.
Unit: mV.
24 Real-time current: The location of speed
displays symbol CUr, the location of mileage
displays real-time current value. Unit: mA.
25 Percentage of relative capacity: The locati-
on of speed displays symbol rCP, the location of
mileage displays percentage of relative capacity
value. Unit: %.
26 Absolute Percent Capacity: The location
of speed displays symbol ACP, the location of
mileage displays absolute percent capacity
value. Unit: %.
27 Remaining Capacity: The location of speed
displays symbol SCA, the location of mileage
displays remaining capacity value. Unit: mAh.
28 Full Capacity: The location of speed
displays symbol FCA, the location of mileage
displays full capacity value. Unit: mAh.
29 Battery cycle times: The location of speed
displays symbol CYC, the location of mileage
displays the cycle value. Unit: times.
30 The current charging interval: The location
of speed displays symbol PCH, the location of
mileage displays the current charging interval
value. Unit: hr.
31 Maximum charge time interval: The loca-
tion of speed displays symbol bCH, the location
of mileage displays the maximum charge time
interval value. Unit: hr.
MAINTAINANCE REMINDER
(This function is optional)
The display can remind maintainance informa-
tion according to mileage (ODO) and battery
cycle times.
ERROR CODE DEFINITIONS
800U can give a warning message when the E-bike encounters an error. The LCD displays the
ERROR icon and the error code in speed position. Error codes go from 01 E to 07 E, the definitions
are explained in the table below:
ELECTRICAL PARAMETERS
24V/36V/48V battery supply
Rated operating current : 10mA
Max operating current : 30mA
O leakage current < 1uA
Max output current to controller : 50mA
Operating temperature : -30°C to 70°C
Storage temperature : -40°C to 70°C
PRECAUTIONS
1. The display is waterproof but may not be immersed in water completely
2. Do not leave the display in full sunlight when not using it
3. Check the communication between display and controller on a regular basis
4. Do not disassemble units by yourself.
5. Do not use thinner, alcohol or fuel to clean the display or other electrical units.
6. Concentrate on the road and not on the display while driving. Safety first!
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beaufort Licota 2017 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beaufort Licota 2017 in the language / languages: English as an attachment in your email.

The manual is 0.76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Beaufort Licota 2017

Beaufort Licota 2017 User Manual - Dutch - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info