506073
7
Zoom out
Zoom in
Previous page
1/32
Next page
Important!
The manufacturer will not accept liability for any resulting damages caused by the
non-observance of this manual or any unauthorized modification to the device.
z Please consider that damages caused by manual modifications to the devise are
not subject to warranty.
z Never let the power-cord come into contact with other cables! Handle the
power-cord and all connections with the mains with particular caution!
z Make sure that the available voltage is not higher than stated on the rear panel.
z Always plug in the power plug least. Make sure that the power-switch is set to
off-position before you connect the device to the mains. The power-plug has to be
accessed after installing the device.
z Make sure that the power-cord is never crimped or damaged by sharp edges.
Check the device and the power-cord from time to time.
z Always disconnect from the mains, when the devise is not in use or before
cleaning it. Only handle the power-cord by the plug. Never pull out the plug by
tugging the power-cord.
z It is essential to connect the yellow/green conductor to earth.
z The electric connection, repairs and servicing must be carried out by a qualified
employee.
z Do not switch the fixture on and off in short intervals as this would reduce the
laser diode life.
z For replacement, please use fuses of same type and rating only.
z If the device has been exposed to drastic temperature fluctuation, do not switch it
on immediately. The arising condensation water might damage your device.
Leave the device switched off until it has reached room temperature.
z Do not shake the device. Avoid brute force when installing or operating the
device.
z When choosing the installation-spot, please make sure that the device is not
exposed to extreme heat, moisture or dust. There should not be any cables lying
around. You endanger your own and the safety of others!
z The minimum distance between the fixture and surrounding walls must be more
than 50cm.
z Always fix the fixture with an appropriate safety-rope. Fix the safety-rope at the
safety-rope only.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BeamZ Tarvos Laser Effect at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BeamZ Tarvos Laser Effect in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 0,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info