506077
8
Zoom out
Zoom in
Previous page
1/32
Next page
LASER SAFETY LABEL REPRODUCTIONS
Caution – Class 3B LASER RADIATION, WHEN OPEN, AVOID EXPOSURE TO BEAM
LASER RADIOATION AVOID EXPOSURE TO BEAM CLASS 3B LASER PRODUCT.
The label indicates the laser beam output aperture.
LASER EXPOSURE WARNING
LASER LIGHT AVOID DIRECT EYE EXPOSURE
GENERAL SAFETY INSTRUCTIONS
Every person involved with installation and maintenance of this device have to:
z Be qualified
z Follow the instructions of this manual
This device has left out premises in absolutely perfect condition. In order to maintain this condition and to ensure a safe operation, it
is necessary for the user to follow the safety instructions and warning notes written in this manual.
Important!
The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual or any
unauthorized modification to the device.
z Please consider that damages caused by manual modifications to the devise are not subject to warranty.
z Never let the power-cord come into contact with other cables! Handle the power-cord and all connections with the mains with
particular caution!
z Make sure that the available voltage is not higher than stated on the rear panel.
z Always plug in the power plug least. Make sure that the power-switch is set to off-position before you connect the device to the
mains. The power-plug has to be accessed after installing the device.
z Make sure that the power-cord is never crimped or damaged by sharp edges. Check the device and the power-cord from time
to time.
z Always disconnect from the mains, when the devise is not in use or before cleaning it. Only handle the power-cord by the plug.
Never pull out the plug by tugging the power-cord.
z It is essential to connect the yellow/green conductor to earth.
z The electric connection, repairs and servicing must be carried out by a qualified employee.
z Do not switch the fixture on and off in short intervals as this would reduce the laser diode life.
CAUTION! Be careful with your operations. With a high voltage you can suffer a
dangerous electric shock when touching the wires!
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BeamZ Red Green 3D Laser DMX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BeamZ Red Green 3D Laser DMX in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 0,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info