Manual BeamZ PANGO 2500 (page 7 of 15) (English, German, Dutch, Spanish)

589600

Zoom out

Zoom in

1/15

INSTALLATION

Attention:

 The installation of the fixture has to be built and constructed in a way that it can hold 10 times the weight

for 1 hour without any harming deformation.

 The installation must always be secured with a secondary safety attachment, e.g. an appropriate catch net.

This secondary safety attachment must be constructed in a way that no part of the installation can fall down

if the main attachment fails.

 Make sure the area below the installation place is free from unwanted persons during rigging, de-rigging

and servicing.

 The operator has to make sure that safety-relating and machine-technical installations are approved by an

expert before taking into operation for the first time and after changes before taking into operation another

time.

 The operator has to make sure that safety-relating and machine-technical installations are approved by a

skilled person once a year.

 The fixture should be installed in the position where persons cannot reach and where persons may walk by

or be seated.

POWERSUPPLY

On the label on the backside of the light effect is indicated on this type of power supply must be connected. Check

that the mains voltage corresponds to this, all other voltages than specified, the light effect can be irreparably

damaged. The light effect must also be directly connected to the mains and may be used. No dimmer or adjustable

power supply.

CAUTION: Please consider the respective national norms during the

installation! The installation must only be carried out by

an authorized employee or dealers!

CAUTION: When installing the device, make sure there is no highly

in inflammable material (decoration articles, etc.) in

between a distance of min o.5 meter.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of BeamZ PANGO 2500 in the language / languages: English, German, Dutch, Spanish as an attachment in your email.

The manual is 0,57 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

BeamZ PANGO 2500 Manual

Product: