506076
10
Zoom out
Zoom in
Previous page
1/32
Next page
Rigging the Fixture
z The installation of the fixture has to be built and constructed in a way that it can hold 10 times the weight for 1 hour without any
harming deformation.
z The installation must always be secured with a secondary safety attachment, e.g. an appropriate catch net. This secondary
safety attachment must be constructed in a way that no part of the installation can fall down if the main attachment fails.
z Make sure the area below the installation place is free from unwanted persons during rigging, de-rigging and servicing.
z The operator has to make sure that safety-relating and machine-technical installations are approved by an expert before
taking into operation for the first time and after changes before taking into operation another time.
z The operator has to make sure that safety-relating and machine-technical installations are approved by a skilled person once
a year.
z The fixture should be installed in the position where persons cannot reach and where persons may walk by or be seated.
PRODUCT OVERVIEW
z This device has left out premises in absolutely perfect condition. In order to maintain this condition and to ensure a safe
operation, it is necessary for the user to follow the safety instructions and warning notes written in this manual.
z The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual or any
unauthorized modification to the device.
CONTROL & FUNCTION
z Regular breaks during operation are essential to maximize the life of this device as it is not designed for continual use.
z Do not switch the unit on and off in short time intervals
z Always unplug the unit when it is not used for a longer time. Or before replacing the bulb or start servicing.
z In the event of serious operation problems, stop using the fixture and contact your dealer immediately.
CAUTION: When installing the device, make sure there is no highly
in inflammable material (decoration articles, etc.) in
between a distance of min o.5 meter.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BeamZ Green 3D DMX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BeamZ Green 3D DMX in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 0,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info