765484
5
Zoom out
Zoom in
Previous page
1/24
Next page
FILLING RESERVOIR
Before filling unplug from mains!
Place the unit on a flat, stable surface which must not be tilted more than 10° (see drawing)
Fill the tank up to the marking with a good quality bubble fluid (order nr.160.575).
Switch the unit on via the On/Off switch on the rear side.
Switch the unit off after use and unplug it from the mains if it will not be used for a long period of time.
Rinse the unit regularly with clean water.
OPERATION
Once the reservoir has been filled. Connect the power lead into smoke machine and earthed mains outlet. Then you can switch
the power on, the machine start producing bubble.
Switch off when machine not used and unplug from mains if not use for long periods.
Left switch = Remote on/off
Right switch = Manual on/off
0
= OFF
I
= ON
REMOTE
A = On
B = No function
C = Off
D = No function
REPLACING THE FUSE
If the fuse is defective, replace the fuse with a fuse of the same type and value. Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Open the fuse holder on the rear panel with a fitting screwdriver.
Step 2: Remove the old fuse from the fuse holder.
Step 3: Install the new fuse in the fuse holder.
Step 4: Replace the fuse holder in the housing.
ACCESSORIES
High quality bubble fluid, specially designed for Beamz bubble machines guarantees a trouble-free use with a lot of bubbles.
5 liter packaging, ref. no. 160.574
1 liter packaging, ref. no. 160.575
10
10
10
10
PLEASE DON'T FILL OVER THE LINE!
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BeamZ 160.569 - B2500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BeamZ 160.569 - B2500 in the language / languages: English, German, Dutch, French, Polish, Spanish as an attachment in your email.

The manual is 0,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info