Manual BeamZ 160.500 - S2000 DMX (page 4 of 16) (English, German, Dutch)

765344

Zoom out

Zoom in

1/16

- 4 -

DMX control

Connect the machine directly to a DMX controller or a DMX loop with multiple DMX effects. The machine uses a

3-pin XLR connector for DMX connection.

Address Setup: Press the MODE button a number of times until Add appears on the display, with the UP /

DOWN buttons the start address may be set. The start address is defined as a first channel to which the

machine will respond to. Check that there are no overlapping channels used!

Note: It is necessary always lock the DMX loop with a 120 Ohm terminator for correct data transmission.

The DMX data will only be saved when display shows “Ready to Fog”.

Location

Select a location where it is easy to fill the tank. It is also possible to hang the unit by means of the supplied

holder and fixing screws.

Switching the unit off

Switch the unit off by unplugging it from the mains. Otherwise the 2000W heating element will draw

unnecessarily current.

CHANNEL

VALUE

FUNCTION

000-255 Smoke level

000-255 Master dimming

000-255 Red

000-255 Green

000-255 Blue

6 000-255

Strobe + Fade/change speed

function

000-255 Auto

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of BeamZ 160.500 - S2000 DMX in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 0,44 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

BeamZ 160.500 - S2000 DMX Manual

Product: