766354
5
Zoom out
Zoom in
Previous page
1/38
Next page
Laser Light is different from any other light source with which you may be familiar. The light from this product can potentially cause eye injury if not set up
and used properly. Laser light is thousands of times more concentrated than light from any other kind of light source. This concentration of light power
can cause instant eye injuries, primarily by burning the retina (the light sensitive portion at the back of the eye). Even if you cannot feel “heat” from a laser
beam, it can still potentially injure or blind you or your audience. Even very small amounts of laser light are potentially hazardous even at long distances.
Laser eye injuries can happen quicker than you can blink.
It is wrong to assume that a single beam of a bundle of hundreds by the laser beams made, it cannot cause injury.
It is also incorrect to assume that it is safe to look at a moving beam. In the laser safety regulation, it is not legal to aim Class 3B/4 lasers in areas which
people can get exposed also on a dance floor.
Do not point lasers at people or animals.
Never look into the laser aperture or laser beams, this can potentially cause instant eye injury or blindness if laser light directly strikes the
eyes.
Do not point lasers in areas in which people can potentially get exposed, such as uncontrolled balconies, etc.
Install the laser units such that laser beams above the audience move See section later in this manual.
Test the laser units always first before the public is present.
Do not point lasers into the public or at highly reflective surfaces such as windows, mirrors and shiny metal. Even laser reflections can be
hazardous.
Never point a laser at aircraft or into the sky, this is a federal offense.
Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation
exposure.
Do not expose the output optic (aperture) to cleaning chemicals.
The operation of a laser is only allowed if the show is controlled by a skilled and well-trained operator familiar with the requirements that
are needed.
Do not use laser if housing is damaged or open, or if optics appear damaged in any way.
Never leave this device running unattended.
Always use appropriate lighting safety cables when hanging lights and effects overhead.
The legal requirements for using laser entertainment products vary from country to country. The user is responsible for the leg al requirements at the
location/country of use.
This unit contains laser components with high power, live parts and parts that emit radiation. Therefore, the housing,
It can also cause blindness, skin burns and fires.
Further guidelines and safety programs for safe use of lasers can be found in the ANSI Z136.1 Standard “For Safe Use of Lasers”, available from
“www.laserinstitute.org”. Many local governments, corporations, agencies, military and others, require all lasers to be used under the guidelines of ANSI
Z136.1. Laser Display guidance can be obtained via the International Laser Display Association, www.laserist.org.
The use in France is only allowed to the professional user and not to the end user.
See decision: www.legifrance.gouv.fr
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BeamZ 153.716 TERMINATOR IV at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BeamZ 153.716 TERMINATOR IV in the language / languages: English, German, Dutch, French, Polish, Spanish as an attachment in your email.

The manual is 2,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info