766348

BeamZ 153.406 TRIPLE FLEX Manual

6
Zoom out
Zoom in
Previous page
1/7
Next page
How To Control The Unit
Three ways to operation:
A. Master/Slave operation
B. Easy sound active and Auto mode
C. Universal DMX controller
A. Master/Slave operation
The unit can be linked together in daisy chain as many as you need in master/slave mode to perform the great built-in
pre-programmed lighting shows triggered by music.
In Master/Slave mode refer to the DMX settings below:
Master unit: when working at Auto-run or Sound Control mode operation
Slave units: DMX start address MUST be set to 001. (First DIP switch = ON, all other
are OFF)
B. Easy sound active and Auto mode
Set sound active mode: Tenth DIP switch = ON , first to sixth DIP switch ON is mode of adjustable speed ,all other are
OFF
Set Auto mode: Ninth and Tenth DIP switch = ON ,first to sixth DIP switch on is speed mode ,all other are OFF, first to
sixth DIP switch ON is mode of adjustable speed ,all other are OFF
C. Universal DMX controller
When using a universal DMX controller to control the chain of units, you have to set DMX address by Dip switches from 1
to 9 to make sure all the units will receive its DMX signal.
Please refer to the following diagram to know how to address your DMX 512 system in the binary code.
DMX 512 Address Chart:
Dip-switches # 1 # 2 # 3 # 4 # 5 # 6 # 7 # 8 # 9 #10
Value 1 2 4 8 16 32 64 128 256 2-light show
5. DMX 512 Configuration
0: OFF 1: ON -: OFF or ON
Function DIPSWITCH CHART
1 2 3 4 5 6 7 8 9 10
Sound Speed selection
(Slow→Fast)
- - 0 1
Auto - - 1 1
DMX512 SET DMX ADDRESS FOR DMX MODE 0
Channel 1 11～200 DMX Auto
201～255 DMX Sound
Channel 2 0～255 No.1 LED Gobo
Channel 3 0～255 No.2 LED Gobo
Channel 4 0～255 No.3 LED Gobo
Channel 5 0～255 No.1 Motor Scanning
Channel 6 0～255 No.2 Motor Scanning
Channel 7 0～255 No.3 Motor Scanning
Master Auto-run, Sound Control
Slave 1 0 0 0 0 0 0 0 0 0
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BeamZ 153.406 TRIPLE FLEX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BeamZ 153.406 TRIPLE FLEX in the language / languages: English, German, Dutch, Spanish as an attachment in your email.

The manual is 0,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info