765598
4
Zoom out
Zoom in
Previous page
1/22
Next page
4
LASER EXPOSURE WARNING
LASER LIGHT AVOID DIRECT EYE EXPOSURE
Further guidelines and safety programs for safe use of lasers can be found in the ANSI Z136.1 Standard “For Safe Use of
Lasers”, available from “www.laserinstitute.org”. Many local governments, corporations, agencies, military and others, require
all lasers to be used under the guidelines of ANSI Z136.1. Laser Display guidance can be obtained via the International Laser
Display Association, www.laserist.org.
Notices
Non-professional do not dismantle or repair the laser lighting. when there is a problem, please inquire with the professional
or contact with the local dealer;
Do not exposure in the wet or dirty condition;
Prevent the laser lighting from strong vibration or punch;
Prevent other subject enter into the lighting;
Ensure the fan is not blocked;
Before power on, be sure electric outlet is connected well with the socket;
Do not turn on and turn off frequently , avoid to turn on the power for a long time;
Please power off the lighting for 15 minutes after running two hours, ensure that the laser system is in well cooling state;
Do not looking at the laser source using telescope
Do not touch the laser lighting by wet hand and forcefully pull the power line;
The distance between lighting and casting medium should be more than 1 meters;
Do not dismantle the lighting;
Please directly contact with the local dealer when the trouble occurred;
When to be transported, use the original package to avoid shocking;
Maintenance
Please clean the lens regularly. Do not do it using the wet cloth or other chemical. the clean times is depend on the using
frequency and surrounding condition; it is recommended that should be cleaned every 20 days;
Please clean the lighting surface and engine outlet regularly.
Statement
All the user should abide by the above waning items and operation instructions, otherwise any trouble due to incorrect
operation is out of warranty.
Pls note! The use in France is only allowed to the professional user and not to the enduser. See decision:
www.legifrance.gouv.fr
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BeamZ 152.752 Apollo at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BeamZ 152.752 Apollo in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info