CAUTION!Please consider the respective national norms during the installation! The installation must only be carried out by an authorized
employee or dealers!
This fixture has been designed to be hung. It is recommended for safety purposes, your lighting effect are properly mounted using a suitable hanging
clamp and safety cable. Items appropriate for safe and effective mounting are easily sourced from your lighting vendor.
International laser safety regulations require that lasers must be operated in the fashion illustrated below, with a minimum of 3 meters (9.8 ft) of vertical
separation between the floor and the lowest laser light vertically. Additionally, 2.5 meters of horizontal separation is required between laser light and
audience or other public spaces.
CAUTION!Use of controls, adjustments, or performance of procedures other than what is specified herein may result in hazardous radiation
exposure!
•The installation of the fixture has to be built and constructed in a way that it can hold 10 times the weight for 1 hour without any harming
deformation.
•Always use the supplied mounting bracket to hang the fixture.
•The fixture should aid of a mounting bracket (not included) to the supplied mounting bracket to be confirmed.
•The installation must always be secured with a secondary safety attachment, e.g. an appropriate catch net. This secondary safety attachment
must be constructed in a way that no part of the installation can fall down if the main attachment fails.
•Make sure the area below the installation place is free from unwanted persons during rigging, de-rigging and servicing.
•The operator has to make sure that safety-relating and machine-technical installations are approved by an expert before taking into operation
for the first time and after changes before taking into operation another time.
•The operator has to make sure that safety-relating and machine-technical installations are approved by a
skilled person once a year.
•The fixture should be installed in the position where persons cannot reach.
•For your own safety and for others, we do strongly recommend you to use this laser emergency kill switch.
(ref.no: 152.958)
CAUTION!When installing the device, make sure there is no highly in inflammablematerial (decoration articles, etc.) in between a distance of
min 0.5 meter.
UNPACKING INSTRUCTION
CAUTION!Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are present,and
have been received in good condition. Notify the shipper immediately and retain packing material for inspection if any parts appear damage from
shipping or the package itself shows signs of mishandling. Save the package and all packing materials. In the event that the product must be returned to
the factory, it is important that the product be returned in the original factory box and packing.
If the unithas been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately.The arising condensation water
might damage your unit. Leave the unitswitched off until it has reached room temperature.
POWERSUPPLY
On the label on the backside of theunitis indicated on this type of power supply must be connected. Check that the mains voltage corresponds to this, all
other voltages than specified, the light effect can be irreparably damaged. The product must also be directly connected to the mains and may be used. No
dimmer or adjustable power supply.
The unit has a powerconnector outputon board. Depending on the local conditionsseveral unitscan be linked by powerconnectorin- and output. Connect
a maximum of four (when using 230V/16A) unitsin a row.Use an approved three-core cable with a cross-section of at least 1.5 mm². The installation
instructions of the manufacturerand the colour coding of the cable must be observed.Do not turn off the unit by turning the powerconnectorbut use the
poweron/off switch or schuko!
WARNING!Always connect the unitto a protected circuit (circuit breaker or fuse). Make sure the unithas an appropriate electrical ground to
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for BeamZ 152.499 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of BeamZ 152.499 in the language / languages: English, German, Dutch, French, Polish, Spanish as an attachment in your email.
The manual is 1,47 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
