766387
20
Zoom out
Zoom in
Previous page
1/32
Next page
20
MODO CANAL DMX
Puede controlar el dispositivo en dos modos:
• Modo de 3 canales
• modo de 5 canales
• Modo de 6 canales
• Modo de 12 canales
• Modo de 24 canales
• Modo de 48 canales
Para ajustar la configuración:
1. Seleccione "CHNd" MODE y presione "ENTER". La opción configurada actualmente parpadeará en la pantalla.
2. Use los botones "ABAJO" y "ARRIBA" para seleccionar 3ch, 5ch, 6ch, 12ch, 24ch o 48ch.
3. Presione "ENTER" para guardar su selección.
COMPORTAMIENTO SIN DMX (ESTADO DMX)
La configuración DMX STATE determina cómo se comporta el dispositivo cuando no recibe una señal DMX. Puede configurar
el dispositivo para que ingrese al modo automático, al modo de sonido o al apagón.
Para ajustar la configuración:
Seleccione "SLNd" y presione "ENTER". Puede elegir entre "Master", "SL1", "SL2" y "d512". Para usar Auto o sonido, el
dispositivo debe configurarse en "Mast". Cuando se selecciona "SL1", "SL2" o "d512", el dispositivo es negro cuando no hay
DMX.
2. Use los botones "Abajo" o ARRIBA para seleccionar "Auto" o "Sonido" y presione "ENTER".
3. Cuando "Auto" puede elegir entre 16 programas automáticos, seleccione su programa con los botones "Abajo" y "ARRIBA" y
presione "ENTER".
Cuando "ShNd" (programas de sonido) puede elegir entre 16 programas de sonido, seleccione su programa con los botones
"Abajo" y "ARRIBA" y presione "ENTER”.
FIRMWARE VERSION
Para visualizar la versión de firmware actual del dispositivo, seleccione "UER" y presione ENTER. La pantalla mostrará la
versión del firmware en el dispositivo. Presione MENU para salir.
MODO IR
Presione la tecla de modo hasta que se muestre Iron o IroF; luego presione el botón
Arriba o Abajo para elegir Hierro. Presione ENTER para confirmar.
Para apagar las luces:
Presione OFF en el control remoto. Todas las luces se apagarán hasta que se
presione el botón [1].
Control de color manual
Puede configurar los colores R / G / B / W con el control remoto presionando el botón
rojo <R> para rojo, el botón verde <G> para el verde, el botón azul <B> para el azul
[3].
Cada intensidad de color se puede ajustar utilizando los botones de encendido y
apagado [2]
Modo de color preestablecido:
Presione uno de los doce colores predefinidos en el control remoto [4]. No es posible
el oscurecimiento con colores preestablecidos.
AUTO / SONIDO en el IRC.
Presione uno de los cuatro botones para elegir entre los diferentes programas
automáticos. [5]
CAMBIANDO EL FUSIBLE
Si el fusible está defectuoso, reemplace el fusible por un fusible del mismo tipo y valor. Antes de sustituir el fusible, desconectar
de la corriente.
Procedimiento:
Paso 1: Abra el portafusibles del panel trasero con un destornillador adecuado.
Paso 2: Retire el fusible viejo del portafusibles.
Paso 3: Instale el fusible nuevo en el portafusibles.
Paso 4: Vuelva a colocar el portafusibles en la caja.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BeamZ 150.563 LCB144 LED Colour Bar at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BeamZ 150.563 LCB144 LED Colour Bar in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 0,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info