765561
4
Zoom out
Zoom in
Previous page
1/24
Next page
4
DISPLAY
The control board offer several features: you can simple set the starting address, run the pre-programmed program or make a
reset. The main menu is accessed by pressing the Mode/Esc-button, browse through the submenu by pressing Up or Down.
Press the Enter-button in order to select the desired menu.
You can change the selection by pressing Up or Down. Confirm every selection by
pressing the Enter-button.
You can leave every mode by pressing the Mode/Esc-button. The functions provided
are described in the following schedule.
DISPLAY MENU
Mode
Description
ADDR
DMX start address
A001-A512
CHND
DMX Channel Mode
7 Channels
12 Channels
SLND
Master / Slave
NAST
SL1
SL2
SOUN
Sound Sensitivity
0-100
AUTO
Auto Mode
NO
YES
STBY
Standby / Pause
NO
YES
PAN
X-Motor forward/reverse
NO
YES
TILT
Y-Motor forward/reverse
NO
YES
LED
Digital display
ON
OFF
DISP
Digital
ON
OFF
TEST
Function self-checking
HOUR
Machine time record
RSET
Reset self-checking
DMX-512 CONNECTION
If you are using a standard DMX controller, you can connect the DMX output of the controller directly to the DMX input of the
first unit in a DMX chain. Always connect the output of one unit with the input of the next unit until all units are conn ected.
If you use a controller with 5 pin DMX connection you will need to use a 5-pin to 3-pin adapter.
At the last fixture, the DMX cable has to be terminated. Solder a 120 Ohm resistor between signal (-) and signal
(+) into a 3-pin XLR connector and plug this into the DMX output of the last fixture in the chain.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BeamZ 150.518 - MHL74 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BeamZ 150.518 - MHL74 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 1,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info