765563

BeamZ 150.509 - MHL108 Manual

8
Zoom out
Zoom in
Previous page
1/12
Next page
8
DMX-512 CONNECTION
If you are using a standard DMX controller, you can connect the DMX output of the controller directly to the DMX
input of the first unit in a DMX chain. If you wish to connect a DMX controller with other XLR outputs you will need
to use adapter cables.
1 = Shield
2 = Signal (-)
3 = Signal (+)
Connect the DMX output of the first unit in a DMX chain with the DMX input of the next unit in the chain. Always
connect the output of one unit with the input of the next unit until all units are connected. If you use a controller with
5 pin DMX connection you will need to use a 5 pin to 3 pin adapter.
Caution at the unit, the DMX cable has to be terminated with a terminator. Solder a 120 Ohm
resistor between Signal (-) and Signal (+) into a 3-pin XLR connector and plug this into the DMX
output of the last unit in the chain.
DMX SETTING
6 Channel
Channel
Value
Description
1
000-255
Adjust Pan movement
2
2
000-255
Adjust Tilt movement
3
000-010
No function
011-200
Master dimmer
201-255
Adjust strobe from slow to fast
4
000-255
Red color adjustment from dark to bright
5
000-255
Green color adjustment from dark to bright
6
000-255
Blue color adjustment from dark to bright
11 Channel
Channel
Value
Description
1
000-255
Adjust Pan movement
2
000-255
Adjust Pan fine-movement
3
000-255
Adjust Tilt movement
4
000-255
Adjust Tilt fine-movement
5
000-255
All dimming adjustment from dark to bright
6
000-255
Red LED, adjustment from dark to bright
7
000-255
Green LED, adjustment from dark to bright
8
000-255
Blue LED, adjustment from dark to bright
9
000-009
No function
010-248
Colour mixing
249-255
Full on
10
000-009
No function
010-255
Adjust strobe from slow to fast
11
000-127
No function
128-255
Auto/sound mode
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BeamZ 150.509 - MHL108 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BeamZ 150.509 - MHL108 in the language / languages: English, German, Dutch, Spanish as an attachment in your email.

The manual is 0,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info