768118

Be Cool Zero - 2021 Manual

22
Zoom out
Zoom in
Previous page
1/48
Next page
EN
22
2 If the seat belt is short:
a. In most vehicles, the height of the shoulder belt can be adjus-
ted, adjust it to the lowest position.
b. If the vehicle seat can be moved, move it backwards.
3. INSTALLING THE SEAT IN THE CAR
The ZERO safety seat must be installed FACING THE OPPOSITE
DIRECTION IN WHICH THE CAR IS TRAVELLING. Decide on the
seat after reading the “Choosing where to install the safety seat”
section.
To install the seat carefully follow the steps below:
3a.- Position the safety seat on the vehicle seat.
3b.- Pass the seat belt buckle over the baby’s feet and fasten it.
3c.- Insert the abdominal part of the seat belt through the slots (1)
on the sides of the frame.
3d.- The shoulder part of the vehicle seat belt should be passed
behind the safety seat.
3e.- Turn the handle (6) to the AUTO position, the furthest
forward. The full car symbol should
be displayed on the sides of the handle.
3f.- Tighten the car seat belt and fasten the locking clip (2). Make
sure that the safety seat is securely anchored by pulling it.
WARNING: For installing rear facing safety seats, the correct guides
for tting the seat belt are marked on the chassis in blue. DO NOT
use any guide that is not described in these instructions or any on
the baby carrier that are not coloured blue.
If the safety seat is installed with the ISOx base (optional), follow
the instructions on the base.
4. PUTTING THE BABY INTO THE SAFETY SEAT
4a.- Loosen the harness by puling on the shoulder straps while
pressing the tightener button (8).
4b.-Undo the clasp.
4c.- Put the baby in the safety seat, making sure that they are
sitting back in it and that their back is straight. Join the top
ends of the clasps.
4d.-Insert them in the fastener and press until you hear a ZERO.
4e.-Tighten the shoulder straps and pull the tightener strap (7).
5. INSTALLING ZERO IN A PUSHCHAIR
Your ZERO carrycot can be fastened to any BE COOL chassis that
has the PRO-FIX system.
5a.- To fasten the safety seat to a chassis, insert the connections
in the cavities on the chassis and press until you hear a ZERO.
5b.- To release the ZERO from the chassis, pull both buttons on
the sides of the handle (9) and lift the seat
WARNING
Never leave your baby on their own.
Any changes or additions to the ZERO without the correct
authorisation from BE COOL may seriously affect the safety of the
restraining system.
Read these instructions carefully before use and keep them for
future reference. Your child’s safety may be affected if you do not
follow these instructions.
This safety device cannot be used without its cover, or replaced
with one that is not the original, as it is an integral part of the
system’s safety features.
Never add a mattress pad, pillow or extra padding to make it more
comfortable for the child as this will alter the safety characteristics
of the system.
Check that the seat has been positioned correctly.
Make sure that the seat belt is not trapped between the folding
seats or doors.
IM 1631,03 ZERO ins OK.indd 22 19/4/21 20:10
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Be Cool Zero - 2021 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Be Cool Zero - 2021 in the language / languages: English, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 4,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info