768120
16
Zoom out
Zoom in
Previous page
1/36
Next page
16
3. INSTALLING THE SEAT IN THE CAR
The ZERO safety seat must be installed FACING THE OPPOSITE DIRECTION IN WHICH THE
CAR IS TRAVELLING. Decide on the seat after reading the “Choosing where to install the
safety seat” section.
To install the seat carefully follow the steps below:
3a.- Position the safety seat on the vehicle seat.
3b.- Pass the seat belt buckle over the baby’s feet and fasten it.
3c.- Insert the abdominal part of the seat belt through the slots (1) on the sides of the frame.
3d.- The shoulder part of the vehicle seat belt should be passed behind the safety seat.
3e.- Turn the handle (6) to the AUTO position, the furthest forward. The full car symbol should
be displayed on the sides of the handle.
3f.- Tighten the car seat belt and fasten the locking clip (2). Make sure that the safety seat is
securely anchored by pulling it.
WARNING: For installing rear facing safety seats, the correct guides for fitting the seat belt
are marked on the chassis in blue. DO NOT use any guide that is not described in these
instructions or any on the baby carrier that are not coloured blue.
If the safety seat is installed with the ISOx base (optional), follow the instructions on the
base.
4. PUTTING THE BABY INTO THE SAFETY SEAT
4a.- Loosen the harness by puling on the shoulder straps while pressing the tightener button
(8).
4b.-Undo the clasp.
4c.- Put the baby in the safety seat, making sure that they are sitting back in it and that their
back is straight. Join the top ends of the clasps.
4d.-Insert them in the fastener and press until you hear a ZERO.
4e.-Tighten the shoulder straps and pull the tightener strap (7).
5. INSTALLING ZERO IN A PUSHCHAIR
Your ZERO carrycot can be fastened to any BE COOL chassis that has the PRO-FIX system.
5a.- To fasten the safety seat to a chassis, insert the connections in the cavities on the chassis
and press until you hear a ZERO.
5b.- To release the ZERO from the chassis, pull both buttons on the sides of the handle (9)
and lift the seat
WARNING
Never leave your baby on their own.
Any changes or additions to the ZERO without the correct authorisation from BE COOL may
seriously affect the safety of the restraining system.
Read these instructions carefully before use and keep them for future reference. Your child’s
safety may be affected if you do not follow these instructions.
This safety device cannot be used without its cover, or replaced with one that is not the origi-
nal, as it is an integral part of the system’s safety features.
3
4
5
EN
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Be Cool Zero - 2017 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Be Cool Zero - 2017 in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info