768112

Be Cool Tornado i-Fix Manual

22
Zoom out
Zoom in
Previous page
1/52
Next page
EN
22
2 - INSTALLING WITH VEHICLE’S SEAT BELT
1. Place your child in the car seat and make sure they are sitting
well back.
2. Thread the vehicle’s seat belt through the belt guide under the
headrest and the belt guide under the armrest.
2.1. Pass the diagonal section of the seat belt through the belt
guide under the headrest.
2.2. Pass the lap section of the seat belt through the seat belt
guide under the armrest next to the seat belt buckle.
2.3. Ensure that no part of the seat belt has become twisted or
trapped and that the car seat’s fabric cover is not impeding the
movement or correct tting of the seat belt.
3 - INSTALLING THE CHILD CAR SEAT
3. Ensure that the diagonal belt lies gently on the child’s
shoulder and the lap belt is worn over the hips Tighten the
diagonal section of the seat belt by pulling it upwards until
there is no slack and the belt holds the child rmly in place.
4. To take the child out of the seat, simply unfasten the seat belt
and undo the shoulder belt guide.
4 - USE THE ISOFIX SYSTEM IF YOUR VEHICLE’S
SEAT HAS ADDITIONAL ISOFIX ANCHOR
If your vehicle is equipped with Isox anchor points, these should
be used to obtain a more stable installation.
These cars will have plastic elements that guide the seat’s Isox
anchors into their correct positions. If your vehicle does not have
these guide elements, you can use the plastic guides provided
with the car seat.
Caution: When the seats of your car are equipped with Isox
anchor points, install your car seat using your vehicle’s ISOFIX
anchor points ALWAYS and ONLY in combination with the car’s
safety belts. See the vehicle list.
Match the back rest hook to the rear side of base from lying
position to upright position, to make sure the back rest is fully
matched into the base.
1. Place the car seat in the appropriate position on the vehicle’s
seat, facing in the direction of travel.
2. Rotate the adjuster button in anti-clock wise direction, and
simultaneously pull the isox connectors outwards as far as it
goes, make sure it cannot be push backwards.
3. Position the car seat facing forwards on the vehicle seat with
ISOFIX points.
4. Match the ISOFIX connectors to the vehicle’s anchoring point
until hear a “click”.
5. Rotate the adjuster button in anti-clock wise direction, and
simultaneously push the seat against the vehicle to eliminate
the gap between car seat and vehicle’s seat.
ATTENTION! ISOFIX connectors are an additional tting system
for securing the car seat and not suitable for securing a child.
Child must always be secured by means of the car’s three-point
safety Belt.
IM 2013,01 TORNADO_IFIX ins OK.indd 22 19/6/18 19:24
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Be Cool Tornado i-Fix at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Be Cool Tornado i-Fix in the language / languages: English, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info