Manual Be Cool Pivot (page 67 of 144) (English, French, Italian, Portuguese, Spanish)

768106

Zoom out

Zoom in

1/144

If you want to release the anti-rotation strap, press the

button so the adjuster swivels at an angle.

REMOVING THE 5-POINT HARNESS

Step 1: as shown in gure 1, loosen the anti-rotation strap

and turn the safety seat 90 degrees (see the rotation

function section on page 8).

Step 2: as shown in gure 2, press the central adjuster

and loosen the shoulder straps. Then, set the headrest

to the correct height.

Step 3: as shown in gure 3, tighten the anti-rotation

strap and pull it towards the headrest temporarily. Next,

open the rear frame.

Step 4: remove the shoulder pads. As shown in gure 4,

separate the shoulder straps with the strap clip as shown

in gures 1-2-3-4. Then, pass the clip through the hole in

the rear frame and pass the strap forwards. As shown

in gures 5 and 6, unfasten the shoulder pads, separate

the shoulder straps with the strap clips and remove the

shoulder pads.

Step 5: as shown in gure 5, unfasten the harness buckle,

and separate the pad and the ller of the buckle.

Step 6: as shown in gure 7, separate the harness buckle

and the child safety seat.

Step 7: storing the shoulder straps. As shown in gure

8 (1-2-3), roll the strap up and place it in the channel in

the base.

Step 8: place the anti-rotation strap in the rear of the

frame and close it. Store all the detachable parts safely.

As shown in the previous diagram, you should now have

removed the 5-point safety harness completely.

Attention: When tting the shoulder straps and clip of

the harness, make sure the straps are not twisted.

As shown in the previous diagram, when putting the

shoulder straps back in place, make sure that they pass

through the harness shaft and that the harness adjust-

ment strap does not go through it.

a-Harness shoulder strap

b-Harness shaft

c- Harness adjustment strap

d- Metal shaft

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Be Cool Pivot in the language / languages: English, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 3,15 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Be Cool Pivot Manual

Product: