Manual Be Cool Jet i-Fix (page 15 of 26) (English, German, French, Italian, Portuguese, Spanish)

768102

Zoom out

Zoom in

1/26

INSTRUCCIONES

GEBRAUCHSANWEISUNG

INSTRUÇÕES

INSTRUCTIONS

ISTRUZIONI

•

and ONLY in combination with the vehicle

seat belts. See usage list.

2.1. Rotate the JET i-ﬁx anchors from the base

outwards towards the back of the vehicle

seat.(F6)

2.2. Place the safety seat in the appropriate

position. Make sure that the JET i-ﬁx anchors

are lined up with the vehicle’s Isoﬁx anchors.

2.3. Push the JET i-ﬁx car seat against the

backrest of the vehicle seat, and at the same

time insert the two JET i-ﬁx anchors into the

plastic guides previously fastened into the an-

chor points until both click into place.(F7)

2.4. Make sure that it is ﬁrmly in place, check

both connectors of the vehicle’s Isoﬁx anchors

by pulling outwards, they should not move

outwards at all.

Releasing the JET i-ﬁx anchors

1. To release the JET i-ﬁx anchors from the

Isoﬁx anchors, pull both the release devices

as shown in F8.

Positioning your child in the JET i-ﬁx seat

1. Place your child in the JET i-ﬁx seat and

make sure he sits well back against the back-

rest.

2. Thread the vehicle seat belt through the

belt guide under the headrest and the belt

guide under the armrest.

2.1. Pass the diagonal section of the seat belt

through the belt guide under the headrest.

(F9)

2.2. Pass the lap section of the seat belt

through the seat belt guide under the armrest

next to the seat belt buckle.(F10)

2.3. Ensure that no part of the seat belt has

become twisted or trapped and that the ve-

hicle seat upholstery does not impede the

movement or correct ﬁtting of the seat belt.

3. Ensure the diagonal belt lies gently on the

child’s shoulder and the lap belt should be

worn over the hips. Tighten the diagonal sec-

tion of the seat belt by pulling it upwards until

there is no slack and the belt holds the child

ﬁrmly in place.(F11)

4. To take the child out of the seat, simply

unfasten the seat belt and take it out of the

shoulder belt guide.

Adjusting the headrest height

To adjust the height, pull the button situated

behind the headrest upwards and slide the

headrest in the required direction (F12). When

you reach the correct height, release the but-

ton and move it until it reaches the closest

locking position, and clicks into place.(F13)

Warning:

An unoccupied JET i-ﬁx seat should still be

fastened with the JET i-ﬁx anchors and the

three-point seat belt.

Make sure any luggage or other objects are

properly secured.

Make sure the belt is not twisted

The lap belt should be worn over the hips.

Checking the height of the shoulder belt.

To ensure the best protection for your child,

the shoulder belt must be guided so that it

passes gently over the child’s shoulder. You

will need to adjust this position as child grows.

(F14)

REMOVING THE COVER FOR WASHING

The cover is a safety feature. Never use the

JET i-ﬁx seat without the cover.

Headrest: Remove the headrest cover by pull-

ing the back part forwards. Finally remove the

headrest cover. (F15)

Backrest: Remove the cover from both side

protection parts, and then pull forwards to

remove it completely.(F16).

Booster cushion: Unfasten the strap on the

rear part, and pull the cover forward. (F17)

Wash by hand and at a temperature no hotter

than 30 C. To put the cover on again, follow

the same steps, but in reverse order.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Be Cool Jet i-Fix in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,81 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Be Cool Jet i-Fix Manual

Product: