580576
6
Zoom out
Zoom in
Previous page
1/34
Next page
SECTION 1A : INSTALLATION - HARDWARE
1. Install the wheel magnet on a spoke, using a Phillips srewdriver.
2. Position the speed sensor on the fork leg to achieve the correct alignment with the wheel
magnet. If needed, move the wheel magnet. When you have achieved the correct align-
ment, pass two zip-ties through the speed sensor and around the fork leg.
3. Re-check the alignment of the speed sensor, and tighten both zip-ties. The distance be-
tween the wheel magnet and the sensor point should be maximum 5mm.
4. Cut off the excess length of the zip-ties.
INSTALLING THE WHEEL MAGNET AND SPEED SENSOR
1
2
4
5. The bracket can be installed on the stem as well as the handlebar. The bracket is pre-
assembled in the handlebar position.
6. If you would like to have your computer on the stem, loosen the four screws on the
bracket, rotate the bracket 90 degrees and tighten the four screws.
7. Pass two zip-ties through the bracket and around the stem/handlebar. Cut off the excess
length of the zip-ties.
8. Place the BBB computer in the bracket and rotate clockwise till you hear a “click” sound.
INSTALLING THE COMPUTER BRACKET
5
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BBB Cycling BCP-51WH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BBB Cycling BCP-51WH in the language / languages: English as an attachment in your email.

The manual is 4,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BBB Cycling BCP-51WH

BBB Cycling BCP-51WH User Manual - German - 34 pages

BBB Cycling BCP-51WH User Manual - Dutch - 34 pages

BBB Cycling BCP-51WH User Manual - French - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info