76059
35
Zoom out
Zoom in
Previous page
1/44
Next page
4) Place the top hinge cover back into position and using a
screwdriver, fully tighten it to the top of the cabinet.
The water inlet hose and water filter
o The water pressure should be 2 bar or higher to allow the
icemaker to operate correctly.
o Care should be taken to make sure that the water inlet does not
come into contact with any hot surfaces.
o The water filter only filters the water; it does not eliminate
bacteria or microbes.
o The water filter life will depend on how often you dispense water
and ice. We recommend that the water filter is replaced at least
every 6 months.
o IMPORTANT: The water inlet MUST be connected to your cold
water supply.
Connecting the water inlet hose and water filter
1) Place the seal inside of
connector A and then screw
connector A securely onto your
cold water mains supply. Push
the water inlet hose firmly onto
connector A.
2) At the rear of the appliance, you will eventually connect a holder
which you will clip the water filter into (on the right or left hand side).
o You should measure an appropriate distance from the tap along
the water inlet hose and mark a position where you will want to
place the water filter.
o IMPORTANT: Put the water filter in a position where it will be
able to clip into the holder that you will position on the rear of
the appliance.
35
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baumatic TITAN 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baumatic TITAN 2 in the language / languages: English as an attachment in your email.

The manual is 0,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info