338805
14
Zoom out
Zoom in
Previous page
1/20
Next page
13
1) Allow for adequate space and install your fridge on a
firm, level floor. This is very important as the appliance
must be level so that there will be no unnatural noises or
poor cooling.
2) Ensure that you are going to be placing your fridge-
freezer away from heat sources and in a well-ventilated
position. This should be at least 50 cm from radiators, gas
or coal stoves and 5 cm away from electric stoves. Do not
place the appliance in the path of direct sunlight.
3) Make sure that the plug is accessible after positioning
your fridge-freezer.
4) Keep a space of 15cm above your fridge freezer.
5) You need 5 inches,
(12.7 cm) clearance
between the rear of
your appliance and
the wall behind it. If
supplied, fit the plastic
wall spacers to the
condenser at the back
of the refrigerator.
This will maintain
good performance.
6) If placing beside another refrigerator or freezer, keep at
least 2cm between the units to prevent condensation.
7) Gently move the appliance into place or, in the case of
installing in a unit, into its housing.
8) Your fridge-freezer
has adjustable feet so you
will be able to level it to the
surface on which you want
to install it. Simply turn
each foot to either raise or
lower it.
INSTALLATION INSTRUCTIONS –RETRO FRIDGE:
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baumatic retro1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baumatic retro1 in the language / languages: English as an attachment in your email.

The manual is 0,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info