133405
21
Zoom out
Zoom in
Previous page
1/28
Next page
5) Fix the upper chimney section to the hanging
plate, using the 4 x self tapping screws.
o Slide the lower chimney section onto the
angle bars and raise it until it sits just below
the upper chimney section.
o Use the hanging hook to temporarily keep
the lower chimney section in this position, to
make sure that it does not drop down whilst
fixing the main body of the hood to the
angle bars.
6) If you are going to be using the
hood in extraction mode, you should fit
the spigot for the ducting hose onto
the main body of the cooker hood,
using the 4 x M4 bolts,
7) Lift the main body of the cooker hood onto the angle bar and
then fix it into position using the 16 x M4 bolts.
o IMPORTANT: This stage of the installation process MUST
be completed by two people.
o IMPORTANT: The 16 x M4 bolts MUST be securely
tightened.
21
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baumatic pti9735ss at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baumatic pti9735ss in the language / languages: English as an attachment in your email.

The manual is 1,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info