111736
29
Zoom out
Zoom in
Previous page
1/36
Next page
29
Connecting the espresso maker to the mains water supply
Your coffee machine can be connected permanently to your mains
water supply.
IMPORTANT: The inlet hose used for connecting the appliance
to the mains water supply should be suitable for supplying
water for human consumption (FDA approved/MIN 5mm- MAX.
12/13mm) and obtained from a DIY or plumbing store.
1. Connect the inlet hose (G3/4")
coupling connecter to the inlet
valve at the rear of the espresso
machine as shown in the opposite
picture. Make sure the connection
is securely tightened.
2. Insert the end of the inlet hose into
the inlet hose coupling that you
connected to the espresso maker in step
1.
3. Feed the inlet hose through a pre-cut hole in the housing
unit before installing the espresso maker.
4. Connect the other inlet hose coupling
to your mains water supply.
Warning: Connect the inlet
hose to water mains
connection fit for human
consumption only.
5. The inlet hose coupling connector
should be hand tightened only.
IMPORTANT: DO NOT over tighten the
inlet hose coupling.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baumatic PECM 1 SS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baumatic PECM 1 SS in the language / languages: English as an attachment in your email.

The manual is 1,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info