6. TIME AND ALARM SET
After the first connection of the oven to the mains supply, the display shows the preset language. You can
change the language by pressing the “-“ o “+“ button.
This may be confirmed using the mode button or is accepted automatically after 10 seconds.
After that the numbers on the display flash meaning that time is not set. In the lower side appears one
advising message.
Pressing the “-“ o “+“ button You can set the time in order to use the cooking mode.
Language and time can also be changed at any time in line with the Menu.
7. MODE SETTINGS
Turning on the oven
To select an oven operating mode the selector knob should be turned to the desired position. Immediately
the heating modes currently active or the basic functions, along with a typical function description detailing
the operating mode, will light up in the display.
4 seconds after selection of the operating mode the suggested temperature recommended by the
manufacturer.
It is possible change the temperature set in any time by pressing " - " or " + " buttons.
Turning off the oven
To stop the program that is currently running the selector knob should be returned to its starting position. 0.
Note! A safety cut out comes into operation automatically after 6 hours if no operation are selcted
Residual heat
When the selector knob is turned to 0 position, the display will show the inner temperature of the oven and
mind the residual heat to the user. This message wil disappear as the oven get cold.
Setting cooking time
Minute minder / alarm clock
This function is available att all times, independent of the mode set, and can therefore be activated in any
operating mode, including when the oven is switched off.
You can set the function by repeatedly pressing of mode button. The minute minder time can be selected
within the range of 0.00 to 90.00 (min/sec). When a time is the bell symbol appears in the display. Time
starts to run down immediately after programming.
If you have set a minute minder alarm, it can be delected by accessing the minute minder function and
pressing the “-“ button as many times as necessary until 0.00 appears, or, simpler, by pressing the button “+”
and “-“ at the same time.
An alarm will sound when the minute minder time has elapsed – this can be stopped by pressing one of the
two “-“ and “+” selector buttons.
Duration (hrs/min)
Once selected the operating mode by the selector knob, it is possible to set the duration of cooking.
Keep pressing the mode button until the program DURATION appears in the display. Select the desired
duration using the " - " e " + " buttons (setting range: 0.00 to 23.59 hrs./min.).
If you have set an operation period (duration), it can be delected by accessing duration function and pressing
the “-“ button as many times as necessary until 0.00 appears, or, simpler, by pressing the button “+” and “-“
at the same time.
6
