112313
19
Zoom out
Zoom in
Previous page
1/28
Next page
162579
FITTING BAR
Install the Fitting Bar (shown in the picture below) so that it
attaches to the top of the appliance and underneath the top of
the cabinetry, indicated by the arrow:
1) Using a 2.8 mm diameter bit, make holes suf cient to attach
the rail as shown on the left. NOTE - door area below the rail
must reach to just below appliance.
2) Fix the hanging rail onto the inside of the décor door using
two 10mm screws, centering it so that 262mm of its width is
on either side of the imaginary vertical middle line of the décor
door.
3) Clasp the eyelet holes in the rail on the inside of the décor
door over the bolts protruding from the top edge of the
refrigerator door. Secure these using the nut caps provided,
as shown in the above illustration. Make sure that you have
the décor door attached levelly before proceeding to the lower
fastenings as shown on right.
Please be aware that the Fitting Bar is not attached
to the appliance and needs to be secured during
installation.
Fitting the Décor Door
18
Installing your
Appliance- continued
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baumatic BV14A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baumatic BV14A in the language / languages: English as an attachment in your email.

The manual is 1,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info