496987
23
Zoom out
Zoom in
Previous page
1/27
Next page
23
Reversing the door of your appliance
Caution! After unscrewing any of the fixing
hinges, hold the door to prevent it from falling
and causing damage.
Any parts that you remove from the appliance whilst
reversing the door, should be retained for later use.
o WHILST SUPPORTING THE DOOR. Unscrew the upper hinge
screws.
o On the bottom side of
the door unscrew the
swing stopper screws
and remove the stopper
(A). Fix the attached
stopper with its bearing
on the opposite side of
the door.
o Unscrew the forced door
closure system (B) and
fix it to the opposite side
of the door (certain
models only).
o Remove the door from the bottom hinge.
o Unscrew the leg holder fixing screws.
o Tilt the appliance backward at a
maximum angle of 35° Unscrew the
leg support screws (C) - left and right,
and remove the leg support cover (D).
Then place it on the opposite side.
Unscrew, remove and then replace
the position of the end switch (E) and
decorative peg (F) (for models with
forced door closing system).
o Unscrew the three screws fixing the
bottom hinge and then fix the bottom
hinge on the opposite side.
o To fit the door on the opposite side of
the freezer proceed with the above procedure in reverse.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baumatic BV12.3A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baumatic BV12.3A in the language / languages: English as an attachment in your email.

The manual is 1,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info