25
o Select the first required function by pressing the microwave
power button (5) or the Convection Combi / Grill.Combi button
(4).
o Use the Weight.Time.Temp button (8) and the Auto Cooking
button (6) to set the desired cooking time for the first phase.
o Then select the second required function by pressing the
microwave power button (5) or the Convection Combi /
Grill.Combi button (4).
o Use the Weight.Time.Temp button (8) and the Auto Cooking
button (6) to set the desired cooking time for the second phase.
o A maximum of 4 phases can be set by following the above
instructions.
o Close the microwave oven door and press the Instant Start
button (1) to begin cooking. The LED display will count down to
show the remaining cooking time. When the first phase has
finished, the second phase will begin automatically.
o If you wish to remove the food before the preset time, you must
press the Stop.Clear button (2) once to clear the preset program
to avoid unintended operation during next use.
o At the end of the cooking time, the LED display will show “End”
and 3 beeps will sound to prompt you to remove the food from
the microwave. If you do not press the Stop.Clear button (2)
once or open the door, the beep will sound every 3 minutes.
o IMPORTANT: The inside of the microwave and the food that
you have been cooking may be extremely hot. So care should be
taken when removing items from the microwave. We would
recommend that you use an oven glove.
o After the food has been removed from the microwave, you
should make sure that the door is closed.
Safety lock
o When the microwave is not heating, it is possible to switch on
the safety lock.
o Press and hold down the Stop.Clear button (2) for 3 seconds
until the LED display shows “OFF”.
o Until the safety lock is switched off, all buttons on the microwave
will be disabled.
