121657
17
Zoom out
Zoom in
Previous page
1/28
Next page
17
erminals
connected to the
terminal marked “N” (neutral), or coloured
o wn wire must be connected to the
terminal marked “L” (live), or coloured red.
nsta la
hased is of a suitable size for the
chosen installation area. In addition check whether there is an
is
o all necessary masonry work prior to the fitting of the
cooker hood.
o l electrical connections are carried out by a suitably
qualified person.
o g installation of the cooker hood the grease
filters should be removed.
o d insure that there is no transit
packaging or any other materials, such as packets of screws,
e
o ible, disconnect and move freestanding or slot-in cookers
from their position, to provide easier access to the rear wall and
o er that
surface with a protective covering and place all cooker hood
o secure the hood to most types of
walls and ceilings. However a qualified technician must verify the
l
o As the colours of the wires in the appliance’s mains lead may not
correspond with the coloured markings identifying the t
in your spur box, please proceed as follows:
o The blue wire must be
black.
The bro
l tion Before beginning i
o Check that the product purc
electrical socket available that will be accessible once the hood
mounted. If the product is going to be used in extraction mode,
then there should also be space to connect a ducting hose to the
outside.
Carry out
Ensure that al
Before commencin
Check inside the product an
guarantees etc. These should be removed and kept for futur
use.
If poss
ceiling. If this is not possible, then a thick, protective covering
should be placed over the worktop, hob top or cooker. This will
help to protect these surfaces from damage and debris.
Select a flat surface for assembling the cooker hood. Cov
parts and fittings on to it.
Rawl plugs are provided to
suitability of the materials, in accordance with the type of wal
and ceiling. The wall and ceiling must be strong enough to take
the weight of the hood.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baumatic BTC6740SS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baumatic BTC6740SS in the language / languages: English as an attachment in your email.

The manual is 1,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Baumatic BTC6740SS

Baumatic BTC6740SS User Manual - Dutch - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info