324493
30
Zoom out
Zoom in
Previous page
1/40
Next page
30
Ga
E
justment conditions for this
appliance are stated on the rating plate which can be found on
er.
a
produ
to the relevant requirements regarding ventilation.
o d
the gas supply using a bayonet type hose. The
hose MUST be suitable for use with LPG gas. They are
o he length of
hose chosen should be such that when the cooker is in situ, the
o Care should be taken to ensure that the temperature rise of
o emi-rapid hob burner.
Remove the appropriate injector and attach a test nipple. Light
o d
,
fit it to the opposite side to
where the hose is b
o IMPORTANT: On completion carry out a gas tightness test.
s connection
ALL INSTALLATION AND SERVICE WORK MUST B
CARRIED OUT BY A CORGI REGISTERED ENGINEER.
o Prior to installation, ensure that the gas supply conditions
(nature of the gas and gas pressure) and the adjustment
conditions are compatible. The ad
the back cov
o This ppliance is not designed to be connected to a combustion
ct evacuation device. Particular attention should be given
o Connection to the cooker should be made with an approved
appliance flexible connection to BS 669.
If the cooker has been converted for use with LPG, then it shoul
be connected to
identifiable by a red band or stripe.
A hose length of 0.9m to 1.25m is recommended. T
hose does not touch the floor.
areas at the rear of the cooker that are likely to come in contact
with the flexible hose do not exceed 70°C.
Gas pressure may be checked on a s
the other burners and observe that the gas pressure complies
with the gas standards in force.
This cooker can be connected to the supply both on the right an
left hand side at the rear of the cooker. To reverse the position
remove the blanking plug and re
eing connected.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baumatic bt2760 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baumatic bt2760 in the language / languages: English as an attachment in your email.

The manual is 0,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info