128194
14
Zoom out
Zoom in
Previous page
1/20
Next page
13
3) Using a drill bit with a diameter of 6mm, make holes in the wall
on the points you have just marked.
4) Insert the rawlplugs in the holes and then screw the support
(upper) screws halfway in.
5) Hook the hood onto the screws and secure it from the inside,
tightening the support and anchoring screws.
6) Connect the discharge pipe to the collar ‘A’ (see Figure 3, below).
7) Replace the grease filter grilles.
FITTING THE HOOD ONTO A KITCHEN WALL UNIT – Extraction Mode
1) Remove the metal grease filter
grilles (see page 9)
2) If using the hood in extraction
mode, make a hole with a
diameter of 130 mm in the
kitchen unit, aligned with the
discharge hole of the hood. If
necessary, make a hole in the wall
to insert the power cable.
3) Rest the hood on the wall unit
and mark the points for the
support holes ‘F’ (see Figure 5,
below, at right).
4) Screw the four screws
provided halfway into the
marks you made.
5) Hook the cooker hood onto
the support screws and screw
them in.
6) Connect the ducting to the
collar (spigot) ‘A’ (Fig. 3).
7) Replace the anti-grease filter
grilles.
INSTALLATION INSTRUCTIONS – Settin
g
up your Hood
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baumatic bt13 1ss at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baumatic bt13 1ss in the language / languages: English as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info