304946
23
Zoom out
Zoom in
Previous page
1/36
Next page
23
Error code failure system
If your appliance senses that it is not operating correctly, then an error
code may appear in the LCD display.
The following error codes can possibly be remedied by the customer
and the steps outlined below should be followed.
BEFORE COMPLETING ANY MAINTAINEANCE ON THE
APPLIANCE, IT SHOULD BE DISCONNECTED FROM YOUR MAINS
POWER SUPPLY.
NO DISPLAY
o Power failure.
9 Check that the power plug is in the mains socket correctly.
9 Check the mains fuse.
E01
o The door is not closed.
9 Close the door firmly.
E02
o Low water pressure.
9 Check the water pressure of your mains water supply.
9 Clean the mesh filter that sits in the inlet hose.
9 Make sure the water tap that the machine is connected to is turned
on fully.
E03
o Pump filter clogged.
9 Clean the filter.
E04
o The washing machine is overloaded.
9 Clean the pump filter.
9 Reduce the wash load.
E05
o No water in the washing machine.
9 Make sure the water tap that the machine is connected to is turned
on fully.
9 Clean the mesh filter that sits in the inlet hose.
E06
o The water was not pumped out.
9 Clean the drain pump filter.
9 Check the drain hose is not blocked or kinked.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baumatic bfw1210w at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baumatic bfw1210w in the language / languages: English as an attachment in your email.

The manual is 1,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info