75572
21
Zoom out
Zoom in
Previous page
1/28
Next page
169890
Caution! After unscrewing any of the xing hinges,
hold the door to prevent it from falling and causing
damage.
Any parts that you remove from the appliance whilst
reversing the door, should be retained for later use.
Required tools; socket spanner nr. 8, screwdriver, torx 25.
Remove the upper hinge cover from both sides of the
appliance.
WHILST SUPPORTING THE DOOR, unscrew upper hinge
screws and remove the upper door from the middle hinge.
On the bottom side of the upper door unscrew the swing
stopper screws and remove the stopper (A). Fix the attached
stopper with its bearing on the opposite side of the door.
Unscrew the forced door closure system (B) and x it to the
opposite side of the door (certain models only).
Unscrew the middle hinge screws and remove the door from
the bottom hinge.
Unscrew the leg holder xing screws.
Tilt the appliance backward at a maximum angle of 35°.
Unscrew the leg support screws (C) - left and right, and
remove the leg support cover (D). Then place it on the
opposite side.
20
Reversing the door of
your appliance
169890en.indd 20169890en.indd 20 16.10.2006 11:36:3016.10.2006 11:36:30
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baumatic BFE 350 SS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baumatic BFE 350 SS in the language / languages: English as an attachment in your email.

The manual is 0,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info