21
o Press the Start/pause button, after a few seconds, you will hear
the appliance begin to fill with water and the wash program will
have started.
o Indicator neons will light on the control panel throughout the
wash cycle, to indicate which stage of the program has been
reached.
o IMPORTANT: If you open the door of the dishwasher whilst a
wash program is in progress, the machine will pause
automatically. After closing the door of the dishwasher, press the
Start/pause button. The wash program will recommence after 10
seconds.
Changing the wash program
o Press the Start/pause button for more than three seconds.
o Turn the program selection knob to the symbol of the wash
program that you require.
o Press the Start/pause button, after a few seconds, you will hear
the appliance continue with the new wash program that you
have selected.
o IMPORTANT: You should only change a wash program if the
detergent has not been released into the machine; otherwise
you may get poor wash results.
Pausing a wash program
o If you press the Start/pause button briefly during a wash
program, then the wash program will pause.
o The program indicator neon will stop blinking.
o The dishwasher will make an audible noise once a minute, until
the Start/pause button is pressed again.
o When the Start/pause button is pressed again, the originally
selected wash program will restart.