339653
26
Zoom out
Zoom in
Previous page
1/32
Next page
10) Reattach the upper door to the hinge pin. IMPORTANT: The door
must be supported from the underneath until step 15 has been
completed. The upper door MUST NOT be allowed to hang loose whilst
steps 10-15 are being followed. We recommend that one person
supports the door, whilst the other person completes the steps
outlined below.
11) Using a small flat-headed screwdriver, prise
the covering caps from the hole in the middle of
the cabinet. Place them in the holes that have
been left by the removal of the middle hinge.
12) Invert the middle hinge and carefully place the
hinge pin into the bottom hole of the upper door.
13) Firmly secure the middle hinge assembly to the cabinet using the
screws that you removed previously. The holes contain insulation foam
which can be easily bored into.
14) Ensure that the upper door is level, and make sure that it can
open and shut easily, without fouling against the cabinet.
15) Reconnect the lower door, taking care to ensure that the top pin
fits securely into its socket.
16) Reattach the bottom hinges, making sure that lower hinge pin and
washers are located on the opposite side of the cabinet to their original
position. Take care to ensure that the lower hinge pin fits into the
socket properly.
17) Ensure that all hole covering caps are replaced.
IMPORTANT: Check that both the upper and lower
doors open and shut correctly, without fouling, after
you have completed the door reversal process.
IMPORTANT: WHEN YOU HAVE REVERSED THE
DOORS OF THE APPLIANCE. AS YOU HAVE PLACED
THE APPLIANCE ON ITS BACK, YOU MUST WAIT FOR
8 HOURS BEFORE SWITCHING THE APPLIANCE BACK
ON.
26
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baumatic bf346 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baumatic bf346 in the language / languages: English as an attachment in your email.

The manual is 1,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info