338796
20
Zoom out
Zoom in
Previous page
1/26
Next page
18
16) Look at the middle section where the middle hinge
will go and gently remove the two filler caps. Note that
the holes contain insulation foam which can be bored
into easily.
17) Take the top door’s bottom hinge socket from the
former opening side of the door. Replace it in the hinge
hole on the other side.
18) Invert the middle hinge and carefully latch the top
pin into the bottom socket of the top door.
19) Now attach the middle hinge assembly. Ensure that
the top door can open and close properly and levelly
before you move to the next step.
20) Reassemble
the hinge ‘C’ and
the support ‘L’ on
the left hand side.
The hinge cover ‘H’
must be remounted
at the end of the
installation.
21) Reverse the position of the hinge sockets at the
top and the bottom of the bottom door (as you had
done with the top door).
22) Remount the lower door. If you can, have
someone else hold it so it goes back on straight and
ensure that the top pin fits into its socket properly.
23) Reattach the bottom hinge, making sure that the
pin fits into its socket properly and it has a washer.
24) Ensure all hole covering caps are replaced.
NOTE – TEST THE OPENING AND CLOSING OF BOTH DOORS
REVERSING THE DOOR OPENING
(
swin
g
of the door
)
:
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baumatic bf337 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baumatic bf337 in the language / languages: English as an attachment in your email.

The manual is 0,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info