363799
8
Zoom out
Zoom in
Previous page
1/16
Next page
INSTRUCTIONS FOR THE
INSTALLER
INSTALLATION
All installation (electrical connection) procedures must be carried out by a skilled
engineer in accordance with the regulations in force.
ALL ADJUSTMENT, SERVICING ETC. PROCEDURES MUST BE CARRIED OUT
WITH THE APPLIANCE DISCONNECTED FROM THE ELECTRICITY SUPPLY.
POSITIONING
The appliance is designed for built-in installation, with dimensions above the appliance as
shown in figures “1” and “2”.
If the hob is combined with an oven, follow the instructions provided by the oven's
manufacturer, in all cases assuring ventilation as specified in fig. “6”. In all cases, the
electrical connections to the two appliances must be made separately, both for electrical
reasons and to simplify extraction.
This product has a special gasket to prevent liquids from seeping into the cabinet. The
gasket must be put carefully in place as shown in figure “7”.
Secure the hob with the brackets provided as shown in figure “7”.
ELECTRICAL CONNECTION
Before making the electrical connection, check that:
- The characteristics of the home's power supply comply with the requirements stated
on the nameplate provided underneath the hob and in this handbook;
- Ensure that there is an earth connection system in good working order;
- If the appliance does not have a power lead, use material complying with
characteristics stated on the nameplate provided underneath the hob and in this
handbook;
- In case of direct connection to the mains, an omnipolar circuit-breaker with contact
breaking gap of at least 3 mm must be installed on the power supply line in an easily
accessible position close to the appliance (there must be no break in the yellow-green
earth wire).
THE MANUFACTURER ACCEPTS NO LIABILITY IN CASE OF FAILURE TO COMPLY WITH THE
ABOVE INSTRUCTIONS AND WITH NORMAL ACCIDENT PREVENTION STANDARDS.
-
Characteristics of the Barbecue cable: 3x1,5 IMQ (H05VV-F)
- Characteristics of the Fryer cable: 3x1,5 IMQ (H05RN-F)
“Please note that this appliances carries the CE mark for normal domestic use and is not suitable
for the marine environment”
Add electrical rating for each model please
5
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baumatic bf1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baumatic bf1 in the language / languages: English as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info