361514
29
Zoom out
Zoom in
Previous page
1/36
Next page
WWW.MANUALS.WS
WWW.MANUALS.WS
9. Sit the coffee machine in the housing unit. You must make sure
that the coffee machine is flush with the housing unit, otherwise
it will not line up properly with the support pieces.
IMPORTANT: You must complete the water connection at
this stage, if you are going to connect the appliance to
your mains water supply.
Do not proceed with the rest of the installation steps listed
below, until you have completed the “Connecting the coffee
machine to the mains water supply” section on page 30.
You should also feed the electrical cable through the hole that you
have made for it in the housing unit. You should NOT connect the
cable to the spur outlet at this stage.
29
10. Locate the screw position in the top right
hand corner of the rear panel.
11. Using the Allen key provided, tighten a
screw through the top right hand hole in
the rear panel, into the support piece
that is behind it.
12. Lift the backplate back into position and refit the screws that you
removed in step 7.
13. Use the Allen key to tighten a screw through the bottom right
hand hole in the rear panel, into the support piece that is behind
it.
14. Open the reservoir door to locate the position of the left hand
screw holes. Use the Allen key to tighten a screw through both of
these holes, into the support piece that is behind them.
IMPORTANT: You must make sure that the four screws that go into
the support pieces are fully tightened.
15. Follow the electrical connection information on page 26 and then
check that the appliance is functioning correctly.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baumatic bec2 1ss at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baumatic bec2 1ss in the language / languages: English as an attachment in your email.

The manual is 0,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info