361514
12
Zoom out
Zoom in
Previous page
1/36
Next page
WWW.MANUALS.WS
WWW.MANUALS.WS
Filling the reservoir (automatically)
IMPORTANT: Make sure that your appliance has been
connected to your mains water supply (see “Connecting the
coffee machine to the mains water supply” section on page
30 of this booklet).
o Push the water reservoir door (3) on the right hand side to open
it.
o Remove the water reservoir (2) from the cabinet.
o Connect the water softener (20) to the tube that hangs down
inside the water reservoir compartment. IMPORTANT: You must
connect the water softener to the left hand tube.
o Switch the appliance on using the ON/OFF switch (12), the
ON/OFF neon (24) will light.
o The red water reservoir empty neon (28) will flash to indicate
that the water reservoir has no water in it.
o After a few seconds the water reservoir will start to fill with
water.
o If the water reservoir empty neon (28) is still flashing after the
appliance has stopped filling with water, you should switch the
machine off using the ON/OFF switch (12). Then switch the
machine back on to commence a further fill of the water
reservoir.
o When the water reservoir has filled sufficiently, the water
reservoir empty neon (28) will go out.
12
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baumatic bec2 1ss at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baumatic bec2 1ss in the language / languages: English as an attachment in your email.

The manual is 0,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info