579963
35
Zoom out
Zoom in
Previous page
1/44
Next page
35
o Loosen the burner screw (V) and then carefully pull the burner
away from its support. IMPORTANT: Care must be taken to
ensure that no damage is caused to the ignition plug or
the thermocouple.
o Unscrew the injector using a 10 mm spanner and replace it with
the stipulated injector for the new gas supply (see table below).
Gas
consumption
Power
(kW)
Burner Types
of gas
Pressure
(mbar)
Injector
Marking
(1/100
mm)
g/h l/h Max. Min.
Natural
(G20)
20
150 - 429
Butane
(G30)
28 95-X 218 -
Oven
Propane
(G31)
37 95-X 214 -
4.50 2.00
Natural
(G20)
20 115 - 191
Butane
(G30)
28 68 145 -
Grill
Propane
(G31)
37 68 143 -
2.00 N/A
IMPORTANT: You must change the oven and grill injectors.
IMPORTANT: After changing the injectors YOU MUST follow the
minimum flow adjustment section below.
Minimum flow adjustment for the oven and grill burners
All work must be carried out by a GASSAFE
registered engineer.
o Light the burner and set the knob at the minimum position.
o Remove the knob from the
tap and place a small bladed
screwdriver in the screw
indicated in the picture
opposite.
o Unscrew the adjusting screw,
in order to increase the gas
flow or tighten the adjusting
screw to decrease the gas
flow.
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baumatic BC190.2TCSS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baumatic BC190.2TCSS in the language / languages: English as an attachment in your email.

The manual is 1,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info