496960

Baumatic B902.1 Manual

23
Zoom out
Zoom in
Previous page
1/32
Next page
CLEANING AND MAINTENANCE
Important: do not use water pressure cleaners or steam cleaners.
Exterior of the oven
Clean with a damp cloth. If it is very dirty, add a few drops
of washing up detergent to the water. Wipe with a dry cloth.
Do not use corrosive or abrasive detergents, which dull the
surface. In the event that one of these products comes into
contact with the oven, immediately clean it using a damp cloth.
Slight differences in colour on the front of the appliance are
determined by the different materials used, such as glass,
plastic and metal.
Accessories
Soak the accessories in water with washing up detergent imme-
diately after use. Food residues can be easily removed using
a brush or sponge.
Oven cavity
Do not use abrasive cleaners or pan scourers. Use special
oven cleaners and follow the manufacturer's instructions.
After every use, wait for the oven to cool then clean it to
prevent the build-up of baked-on food residues.
With long cooking times or when cooking on different
levels, especially food with a high water content (pizzas,
stuffed vegetables, etc.), condensation may form on the
inside of the doors and the seal. When the ovens are cool,
dry the inside of the doors with a cloth or sponge.
Clean the glass of the doors with a suitable liquid detergent.
Replacing the bulbs
Warning: Disconnect the appliance from the power
supply. To remove the side runner frame, push it
simultaneously down and towards the centre of the oven
(A-fig.1). Then lift the side runner frame upwards
to release it from the cavity wall (B-fig.1).
Lower cavity: remove the protective glass cover by
turning it anti-clockwise. Unscrew the faulty bulb and
discard safely, replace it with the new bulb and refit
P
U
L
L
P
U
S
H
Fig. 1
.
CLEANING AND MAINTENANCE
the cover (fig.2). To refit the side runner frame, follow
the steps above in reverse order.
Upper cavity: remove the glass cover using a screw-
driver (fig.3). Change the bulb and refit the glass cover
To refit the side runner frame, follow the steps above
in reverse order.
Fig. 2
Fig. 3
by pressing it slightly.
19
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baumatic B902.1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baumatic B902.1 in the language / languages: English as an attachment in your email.

The manual is 2,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info