336659
26
Zoom out
Zoom in
Previous page
1/36
Next page
26
rn the hob upside down and place it on a cushioned
mat.
o Apply the sealing strip (A) provided around the edge of the
thickness.
Do not use a silicon sealant to seal the appliance
w o remove the hob
if it needs to be serviced.
A) Sealing strip
B) Clamp
C) Screw
B) over the holes that match the size of the
screws. There are one set of screw holes in each corner of the
so that you can still adjust
the position of it.
o Carefully tu
appliance.
o The protective covering must be removed from both sides.
o Do not leave a gap in the sealing agent or overlap the
o IMPORTANT:
against the aperture. This
from the aperture in future
ill make it difficult t
(
(
(
o Place the clamp (
hob. Slightly tighten a screw (C) through the clamp (B) so that
the clamp is attached to the hob, but
o Carefully turn the hob back over and then gently lower it into the
aperture hole that you have cut out.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baumatic b68 1tcss at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baumatic b68 1tcss in the language / languages: English as an attachment in your email.

The manual is 0,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info