Manual Baumatic as35ss (page 20 of 28) (English)

129298

Zoom out

Zoom in

1/28

For installation with a chimney. (Figure 5)

• For ease of mounting, trace a central line on the wall (1). Position

the cut-out template, so that the middle line printed on the top of it,

corresponds to the central line that you have marked previously.

The bottom of the template should correspond to the lower part of

the hood, once it is mounted (2).

• Drill two holes Ø 8 mm and fasten the support bracket „F“ with

two wall inserts and screws (3).

• Mount the hood (5) onto support bracket „F“. You can then level

the appliance using the adjusting brackets (6 and 7).

• Lift the cover screen and mark the lower fixing point on the wall

(10). Remove the hood and drill on this marking, one hole of Ø 8

mm (9). Then insert one wall plug, hang the hood again and fasten

it securely with one screw (11).

CONNECTING THE CHIMNEY SECTION (FIGURE 6).

• Apply the support bracket „G“ to the

wall. Using the chimney support bracket as a

guide, you should mark two holes with a

pencil and then drill out these holes with an

8mm drill bit. Then insert two raw plugs. The

small indentation found in the middle of the

support bracket should coincide with the

centre line previously marked on the wall.

• Fasten the support bracket „G“ to the

wall with two 5 x 45mm screws (4).

• When fitting this appliance with a

chimney section, it is possible to use the

product in recirculation mode. However it is

obligatory to fit a carbon filter (see page 12

for details on how to fit the carbon filter). If

you are going to use the appliance

in extractor mode, please see page 20.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Baumatic as35ss in the language / languages: English as an attachment in your email.

The manual is 0,96 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Baumatic as35ss Manual

Product: