76634
12
Zoom out
Zoom in
Previous page
1/32
Next page
END OF COOKING SEMIAUTOMATIC OPERATION
For fixed-time cooking
Switch on the oven; press button and set the end of cooking time, within the next 23h59m,
23h59m, with buttons - and +. Wait until the 2 dots on the timer display stop flashing and
the timer shows the current hour; then select an available cooking function: the oven will suggest
a preset temperature, which can be changed using buttons and ; wait until the 2 dots
on the timer display stop flashing, then the timer shows the current hour and the oven
starts cooking. When the fixed time has elapsed, the oven stops cooking.
AUTOMATIC OPERATION
For fixed-time cooking
Switch on the oven; press button and set the required cooking time with buttons - and +.
Wait until the 2 dots on the timer display stop flashing, then the timer shows the current hour;
then press button and set the end of cooking time with buttons - and +. Wait again until
the timer shows the current hour, then select an available cooking function: the oven will
suggest a preset temperature, which can be changed using buttons and . When the 2
dots on the timer display stop flashing, the oven begin the delayed start mode: then, it will
automatically start for the requested duration and stop at the requested time. During the delayed
start phase, both the temperature and the function will remain displayed and they can be changed.
When the time of cooking is over, a triple acoustic signal starts while temperature and functions
displays go off, the timer display shows the time and the two Pot and Auto symbols start flashing.
To reset the oven, press any of these buttons: ; the acoustic signal stops
and the oven is ready to receive new commands; it is possible to immediately select a new cooking
function, or switch the oven off.
TIMER DISPLAY SYMBOLS
Pot: when it lights up, it indicates that a cooking function is on, even in manual mode.
The pot does not light up when "light", "preheating" and "defrost" functions are activated.
When the pot is flashing, it indicates that the time cooking is over.
During the delayed start phase, it remains off and then lights up again when the cooking time
has been completed.
A (auto): when it lights up, it indicates that a cooking time setup has been selected (in other
words, the oven is not in manual mode). When flashing, it means that the cooking time is over.
Bell: when it lights up, it indicates that the minute minder is on. When flashing, it indicates
the end of the minute count.
SELECTING THE COOKING TEMPERATURE
When using buttons and , the temperature increases between the low and high setting
for each cooking mode with +/- 5 degrees increases (shown on the temperature display).
SELECTING THE COOKING MODE
When using buttons and , the program icons light up alternately from left to right.
10
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baumatic AS 19 SS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baumatic AS 19 SS in the language / languages: English as an attachment in your email.

The manual is 3,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info