722773

Bauknecht WATK PURE 96G4 DE Manual

5
Zoom out
Zoom in
Previous page
1/16
Next page
EN
Quick Guide
THANK YOU FOR PURCHASING A BAUKNECHT PRODUCT.
To receive more comprehensive assistance, register the
appliance on
www.bauknecht.eu/register
Before using the appliance carefully read the Health and Safety guide.
Before using the machine, it is imperative that the transport bolts are removed. For more
detailed instructions on how to remove them, see the Installation Guide.
CONTROL PANEL
WASH CYCLE TABLE
For all testing institutes:
2) Long cotton cycle: set cycle 5 at a temperature of 40°C.
3) Long synthetics cycle: set cycle 6 at a temperature of 40°C.
* By selecting the cycle and excluding the spin cycle, the washer-dryer will drain only.
** If a drying cycle is also programmed, the machine will run a “wash+dry” programme lasting
45’ with maximum spin speed and a 1kg laundry load.
The cycle duration indicated on the display or instruction manual is an estimate based on
standard conditions. The actual duration may vary in relation to several factors, such as
the temperature and pressure of the incoming water, ambient temperature, amount of
detergent, load quantity and type, load balancing and any additional options selected.
1) Test programme in compliance with standard EN 50229 (Wash):
This cycle is designed for normally soiled cotton loads and is the most ecient in terms of
both electricity and water consumption; it should be used for garments washable at 60°C or
at 40°C. The actual washing temperature may dier from the indicated value.
Test programme in compliance with standard EN 50229 (Drying): select the 10 wash
programme and set the drying level to “A3”, for both loads. The rst drying cycle must be
carried out with the nominal load.
PRODUCT DESCRIPTION
1.
3.
2.
5.
4.
7.
6.
8.
1. Top
2. Detergent dispenser drawer
3. Control panel
4. Handle
5. Porthole door
6. Drain pump (behind the plinth)
7. Plinth (removable)
8. Adjustable feet (2)
1. ON/OFF button
2. DRYING ONLY button and indicator light
3. CHILD LOCK button and indicator light
4. CLEANING ACTION button
5. CLEANING ACTION indicator lights
6. START/PAUSE button and indicator light
7. DELAY START button and indicator light
8. DRYING button
9. SPIN button
10. TEMPERATURE button
11. WASH CYCLE SELECTOR KNOB
1
11
2
DISPLAY
5
6
7
8
9
10
4
3
Maximum load 9 kg
Power input in o mode 0.5 W / in left-on mode 8 W
Detergents and
Additives
Recommended
detergent
Wash cycle
Temperature
Maximum
spin
(r.p.m.)
Max. load for
wash cycle (kg)
Max. load for
drying cycle
(kg)
Duration
(Minutes)
Drying
Wash
Fabric
softener
Powder Liquid
Default Range
1 2
1 Daily Wash & Dry 40 °C
- 40 °C 800 3,5 3,5
The duration of the wash cycles can be checked on the display.
–
2 Shirts Wash & Dry 40 °C
- 40 °C 1000 2,0 2,0
–
3 Pre Iron – – – 1,5 – – – – – –
4 Steam Refresh – – – 1,5 – – – – – –
5 Cotton (2) 40 °C
- 60 °C 1400 9,0 6,0
6 Synthetics (3) 40 °C
- 60 °C 1200 4,5 4,0
7 Anti-Stain 45‘ 40 °C
- 40 °C 1200 4,5 4,5
–
8 Anti-Stain 100 40 °C
- 40 °C 1400 9,0 6,0
–
9 Whites 60 °C
- 90 °C 1400 9,0 6,0
–
10
Eco Cotton
60°/40°
(1)
60 °C
60° C 1400 9,0 6,0
40°C 1400 9,0 6,0
11 Colours 40 °C
- 40 °C 1400 9,0 6,0
–
12 Ultra Delicates 30 °C
- 30 °C OFF 1,0 1,0
–
13 Wool 40 °C
- 40 °C 800 2,0 2,0
–
14 Fast 30' ** 30 °C
- 30 °C 800 3,5 –
–
Rinse – – 1400 9,0 6,0
–
– –
Spin & Pump out * – – 1400 9,0 6,0
– – – –
Required dosage Optional dosage
DETERGENT DISPENSER DRAWER
Compartment *:
Do not insert detergent in this compartment.
Compartment 1: Washing detergent (powder
or liquid)
If liquid detergent is used, the removable plastic
partition A (supplied) should be used for proper
dosage.
If powder detergent is used, place the partition
into slot B.
Compartment 2: Additives (fabric softeners, etc.)
The fabric softener must not exceed the “MAX” level.
! Use powder detergent for white cotton garments, for pre-washing, and
for washing at temperatures over 60°C.
! Follow the instructions given on the detergent packaging.
1
2
A
B
*
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bauknecht WATK PURE 96G4 DE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bauknecht WATK PURE 96G4 DE in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 3,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info