309223

Bauknecht wat 9508 wd Manual

10
Zoom out
Zoom in
Previous page
1/14
Next page
26
WHEN SHOULD THE FOREIGN BODY
TRAP BE EMPTIED?
The appliance is provided with a self-cleaning
pump. The foreign body trap keeps objects like
buttons, coins, safety pins, etc. which have been
left in the laundry.
•
Check the foreign body trap if the appliance
is not draining properly or if it fails to perform
spin cycles.
•
Check the foreign body trap regularly, two or
three times a year and clean it if necessary.
IMPORTANT:
Make sure the water has cooled
before draining.
REMOVING THE FOREIGN BODY TRAP
1.
Unplug the appliance.
2.
Open the foreign body trap cover with a coin.
3.
Place a bowl beneath it.
4.
Turn the foreign body trap slowly
anti-clockwise until the grip is vertical;
do not remove it as yet.
5.
Wait until all the water has drained out.
6.
Now unscrew the foreign body trap
completely and extract it.
7.
Remove any foreign items from the foreign
body trap.
8.
Make sure the pump impeller (in the housing
behind the foreign body trap) is not
obstructed.
9.
Insert the foreign body trap and screw it fully
down in a clockwise direction (until the grip is
horizontal).
10.
Pour 0.5 litres of water into the machine via
the drum and check that water does not leak
from the foreign body trap.
11.
Close the cover.
12.
Plug in the appliance to the electrical outlet.
WHEN SHOULD THE RESIDUAL WATER
BE DRAINED?
•
Before transporting the machine.
•
If the appliance is installed in a room subject to
sub-zero temperatures. It is advisable to drain
residual water from the machine, the drain
hose and the inlet hose after each wash cycle.
DRAINING RESIDUAL WATER
1.
Switch off the appliance.
2.
Unplug the machine from the mains.
3.
Close the tap, loosen the inlet hose from the
machine and let the water drain out.
4.
Remove the foreign body trap, let the water
drain out and close it again.
5.
Open the clip for the drain hose fixation on the
rear part of the machine (see
B
in figure).
6.
Lower the drain hose into a bowl and let the
water drain.
7.
Wait until the flow stops.
8.
Fix the drain hose again to the clip.
9.
Plug in the appliance to the electrical outlet.
Important:
•
Before using the machine again, pour about
1 litre of water into the drum to reactivate the
“Eco system” (depending on model).
•
Before starting a new wash cycle screw the
inlet hose to the machine by hand. Check
water-tightness of washing machine
connections by turning the tap completely on.
•
Replace the drain hose with the “U” bend
and fix it.
REMOVING THE FOREIGN BODY TRAP
2
4
6
DRAINING RESIDUAL WATER
B
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bauknecht wat 9508 wd at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bauknecht wat 9508 wd in the language / languages: English as an attachment in your email.

The manual is 0,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info