69263
37
Zoom out
Zoom in
Previous page
1/56
Next page
27
TROUBLESHOOTING GUIDE
Depending on the model, your washing machine is
equipped with various automatic safety functions. This
enables failures to be detected in good time and the
safety system can react appropriately. These failures
are frequently so minor that they can be removed
within a few minutes.
The appliance will not start, no lamp lights up.
Check whether:
the mains plug is inserted into the socket
the wall socket is functioning correctly (use a table
lamp or similar to test)
the washing machine will not start... (varies
according to model)... and the “Start/Pause” light
flashes.
Check whether:
the appliance door is properly closed (child safety);
The
“Start/Pause”
button has been pressed
In the case of washing machine with LCD this notice
appears:
...and the “Start/Pause” light goes on (for models
with a digital display a dash appears here).
Check whether:
a programme has been selected
...and the “On/Off” lamp goes on.
Check whether:
the appliance door is properly closed (child safety)
the tap is turned on (see also “Failure in the water
supply/safety hose”)
a programme has been selected
The washing machine stops during the
programme
(varies depending on model)
.
Check whether:
The “Rinse Hold” light flashes, or. the “Rinse Hold”
button has been pressed; end this additional option
by pressing the button
For washing machines with an LCD Display: the
“Rinse Hold” function has been preselected and the
“Rinse Hold” symbol appears in the display; end this
additional option by pressing the “ ” button or
end the “Drain” programme
Another programme has been selected and the
“Start/Pause”
button is flashing. Reselect the
desired programme and press the
“Start/Pause”
button
The door has been opened and the
“Start/Pause”
light is flashing. Close the door and press the
“Start/
Pause”
button again. For washing machines with
LCD this notice appears: “PAUSE!”
The “On/Off” button has been pressed and the light
is on
The washing machine safety system has been
activated (see “Failure Indicators” table)
Detergent and additive product residues in
dispenser at end of wash.
Check whether:
the siphon is correctly installed and cleaned (see
“Care And Maintenance”)
sufficient water is entering. The mesh filters in the
water connection could be blocked (see “Care And
Maintenance”)
When using powder detergent beforehand the
coloured insert for dosing liquid detergent has been
removed from the dispenser
The washing machine vibrates during the spin
cycle.
Check whether:
The washing machine is level and standing firmly on
all four feet
The transport bolts have been removed. Before
using the washing machine, it is imperative that the
transport bolts are removed
Final spin results are poor.
The washing machine has an unbalance detection and
correction system. If individual heavy items are loaded
(a bathmat, bathrobe), this system may reduce the spin
speed automatically or even interrupt the spin
completely if it detects too great an imbalance even
after several spin starts, in order to protect the washing
machine.
For washing machines with LCD Display the following
notice appears if an imbalance occurs:
If the laundry is still too wet at the end of the cycle,
add smaller articles of laundry and repeat the spin
cycle
Excessive foam formation may prevent spinning.
Observe correct detergent doses
In this case, for washing machines with LCD this
notice appears in the display:
Check whether spin speed “0” was selected
40105150bGB.fm Page 27 Friday, July 15, 2005 1:03 PM
Black process 45.0° 100.0 LPI
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bauknecht WAK 5460 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bauknecht WAK 5460 in the language / languages: English as an attachment in your email.

The manual is 1,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bauknecht WAK 5460

Bauknecht WAK 5460 User Manual - German - 60 pages

Bauknecht WAK 5460 User Manual - Dutch - 52 pages

Bauknecht WAK 5460 User Manual - French - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info